Samlex
Samlex SA-600R-124 600W 24V pure sine wave power inverter
Converts 24 V DC to 120 V AC pure sine wave with 600 W continuous and 800 W intermittent output, featuring two outlets and selectable 50-60 Hz frequency
- Pure sine wave output protects sensitive electronics
- 600W continuous power with 800W intermittent surge capacity
- 24V DC input for standard battery systems
- Switch-selectable 50/60 Hz frequency for global use
- Two AC outlets with built-in overload protection
Purpose and fit
The Samlex SA-600R-124 is a 600W pure sine wave power inverter designed for 24V DC systems. It supplies clean 120V AC power for sensitive electronics in commercial or heavy-duty environments. Two AC outlets allow direct connection of equipment without extra distribution hardware. Buyers needing higher continuous output or a different input voltage should look elsewhere.
Sustained load behaviour
The unit delivers 600W continuously and can handle 800W intermittently for short peaks. Frequency is switch selectable between 50Hz and 60Hz to match regional requirements. Fan cooling operates during use to maintain thermal stability under load. Overload protection activates automatically when demand exceeds safe limits.
Build and connectivity
The inverter measures 11.6 length, 7.1 width and 2.83 height for mounting in confined spaces. Two standard AC outlets provide plug-and-play access for connected devices. UL listing confirms compliance with recognised safety standards for commercial deployment. The 24V DC input suits battery banks or vehicle electrical systems configured for that voltage.
Highlights
- Pure sine wave output protects sensitive electronics
- 600W continuous power with 800W intermittent surge capacity
- 24V DC input for standard battery systems
- Switch-selectable 50/60 Hz frequency for global use
- Two AC outlets with built-in overload protection
Specifications
| Brand | Samlex |
|---|---|
| Model | SA-600R-124 |
Questions about this item
How much heat and noise does the SA-600R-124 produce during continuous 600 W operation?
The inverter uses fan cooling to manage heat; the fan runs when internal temperature rises, so audible noise will be present under full load.
What DC source and wiring must I already have to run this 24 V inverter at 600 W?
You need a 24 VDC battery bank, adequately sized cables kept as short as practical, and an appropriately rated fuse or breaker on the positive lead.
Will the 120 VAC, 50/60 Hz output safely power older sensitive equipment such as legacy test gear or audio gear?
Yes, the pure sine wave output with switch-selectable 50 or 60 Hz frequency is compatible with older equipment that requires clean sinusoidal AC.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.0011546BTC
In stock
