We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two black Cat 6 Ethernet cables, 10 ft each, 24 AWG, 550 MHz, PVC jacket

sakose

sakose C6EB-10K Cat 6 10 ft 2-pack Black 550 MHz 24 AWG

SKU CH-2B9C-V563C

Two 10 ft Cat 6 UTP patch cables rated to 550 MHz with 24 AWG conductors for 10/100/1000 Mbps networks

  • Cat6
  • Length10 ft.
  • ColorBlack
  • FeaturesCategory 6 Enhanced 550 MHz TIA/EIA 568B.2 UTP Unshielded Tw
  • Two cables included for immediate spare or second run
  • Cat 6 550 MHz rating supports Gigabit 10/100/1000 speeds
  • 24 AWG conductors meet TIA/EIA 568B.2 spec
  • Unshielded twisted-pair design keeps installation simple
  • Black PVC jacket resists wear in home or office use

Cat 6 Enhanced 550 MHz Patch Cable Pair

This two-pack supplies two 10 ft Cat 6 Ethernet cables rated for 550 MHz bandwidth. Each cable uses 24 AWG unshielded twisted-pair conductors with a PVC jacket and follows the TIA/EIA 568B.2 wiring standard. They support 10/100/1000 Mbps Gigabit speeds for wired network connections.

Home and office wired networking

The cables suit anyone linking routers, switches, PCs, printers or NAS devices where a reliable 1 Gbps link is needed. They are not intended for runs that exceed the 10 ft length provided, for outdoor or in-wall installations requiring plenum or direct-burial ratings, or for shielded environments that demand FTP or STP construction.

1 Gbps headroom on short runs

At 10 ft the cables comfortably handle full Gigabit throughput with margin above the 550 MHz specification. Performance will degrade if the cables are extended beyond their rated length, bent sharply past the jacket’s flexibility, or used in electrically noisy settings where unshielded twisted pair offers no protection.

Highlights

  • Two cables included for immediate spare or second run
  • Cat 6 550 MHz rating supports Gigabit 10/100/1000 speeds
  • 24 AWG conductors meet TIA/EIA 568B.2 spec
  • Unshielded twisted-pair design keeps installation simple
  • Black PVC jacket resists wear in home or office use

Specifications

BrandBYTECC
ModelC6EB-10K
Cat6
Length10 ft.
ColorBlack
FeaturesCategory 6 Enhanced 550 MHz TIA/EIA 568B.2 UTP Unshielded Twisted Pair PVC Jacket 24 AWG 4 Pairs Supports Gigabits 10/100/1000

Questions about this item

What network port speed must my router or switch support so these Cat 6 550 MHz cables can run at their rated 1000 Mbps?

Your router or switch needs Gigabit Ethernet ports (10/100/1000) to use the full 1000 Mbps capability of these Cat 6 cables.

Will these 24 AWG Cat 6 patch cables work with my older Cat 5e wall jacks and 100 Mbps devices?

Yes, the cables are backward compatible; they will connect to Cat 5e jacks and 10/100 equipment, but the link will run at the lower 100 Mbps speed of the older gear.

How can I verify each 10 ft cable is performing to the 550 MHz Cat 6 specification after I plug them in?

Check the link lights on both ends show a 1 Gbps connection and run a speed test that sustains near 1000 Mbps throughput.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.