sakose
sakose AQ-LL25 Aqua 25 m 10 Gbps OM3 LC/LC 50/125 fibre optic cable
A 25 metre OM3 multimode cable with LC male connectors at both ends, rated for 10 Gbit/s at 850 nm
- ColorAqua
- Length82.02 ft.
- Connector Number2
- Connector DetailConnector A: 1 - Fiber Optic LC Male Connector B: 1 - Fiber
- Terminal GenderMale to Male
- SpeedMaximum Data Transfer Rate: 10Gbps Cable Rating: Fiber - 10
- 25 metre reach for extended campus or data-centre runs
- 10 Gbps OM3 multimode supports high-speed 10 Gigabit links
- LC male-to-male connectors for direct patch-panel or transceiver mating
- 50/125 µm core/cladding matches standard OM3 infrastructure
- Aqua jacket identifies OM3 cable at a glance
25-metre OM3 LC duplex fibre cable
This 25 metre aqua cable carries two LC male connectors in a duplex arrangement. It is built for 10 Gbit/s multimode links in broadband, telecom and datacom environments. The OM3 50/125 µm fibre operates at an 850 nm wavelength. Installers needing a ready-terminated patch lead for short-reach 10 GbE runs will find it a direct fit.
OM3 50/125 µm capacity at 10 Gbps
The OM3 classification supports 10 Gbit/s Ethernet up to the full 25 metre length without exceeding the standard modal bandwidth budget. At 850 nm the cable delivers the rated headroom for typical data-centre and campus backbone spans. Runs longer than 25 metres or speeds beyond 10 Gbit/s would exceed the OM3 distance specification and require a higher-grade fibre.
LC duplex interface practical limits
The LC duplex connectors mate with standard SFP+ or QSFP+ transceiver ports using the 50/125 µm multimode interface. Insertion loss and return loss remain within IEC limits for the 10 Gbit/s rating at 850 nm. The link cannot support single-mode transceivers, nor can it reach the distance or bandwidth of OM4 or OM5 grades at the same speed.
Highlights
- 25 metre reach for extended campus or data-centre runs
- 10 Gbps OM3 multimode supports high-speed 10 Gigabit links
- LC male-to-male connectors for direct patch-panel or transceiver mating
- 50/125 µm core/cladding matches standard OM3 infrastructure
- Aqua jacket identifies OM3 cable at a glance
Specifications
| Brand | SAKOSE |
|---|---|
| Model | AQ-LL25 |
| Color | Aqua |
| Length | 82.02 ft. |
| Connector Number | 2 |
| Connector Detail | Connector A: 1 - Fiber Optic LC Male Connector B: 1 - Fiber Optic LC Male |
| Terminal Gender | Male to Male |
| Speed | Maximum Data Transfer Rate: 10Gbps Cable Rating: Fiber - 10 Gbit/s |
| Specifications | Fiber Classification: OM3 Fiber Type: Multi Mode Wavelength: 850nm |
| Features | Broadband systems Telecommunication and Data Communication 10 Gigabit High Speed Network Environmnts |
Questions about this item
Will the LC connectors on this 25 m OM3 cable fit the SFP+ modules I already use?
Yes, both ends are LC male connectors, the standard interface for SFP+ transceivers in 10 Gbps multimode links.
How can I verify the link is running at 10 Gbps after I connect it?
Check the switch or NIC port statistics — they should show a 10 Gbit/s negotiated speed with no CRC errors on the 850 nm wavelength.
Does the aqua jacket come pre-terminated with both LC plugs, or do I need to buy connectors separately?
The cable ships with two LC male connectors already fitted, one on each end, so no extra termination parts are required.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115473BTC
In stock
