MediaPack4All 12.5mm Blu-Ray Case Multi-Three Storing Capacity
- 2.4892 L x 18.2118…
- 1 Year Warranty
$13.99
0.00016535BTC
In stock
sakose
sakose 2535AU 2.5" to 3.5" SATA drive enclosure
Converts a 2.5" SATA drive to 3.5" form factor for internal bays, external use or docking stations
- ColorBlack
- Size3.5"
- TypeEnclosure
- MaterialAluminum
- Internal InterfaceSATA I/II/III
- FeaturesConvert your 2.5" SATA HDD/SSD to a 3.5" SATA hard drive for
- Aluminium body dissipates heat from your 2.5" drive
- Fits any 3.5" bay for internal PC installation
- Works as external enclosure for portable storage
- Compatible with HDD docking stations for quick access
- Supports SATA I, II and III drives
What it is and who it’s for
The sakose 2535AU is a black aluminium bracket that converts a 2.5" SATA drive into a 3.5" form factor. It suits builders fitting a laptop SSD or HDD into a desktop drive bay, users connecting the drive to a 3.5" docking station, or anyone needing an external enclosure for mobile use. It accepts any 2.5" SATA I, II or III hard drive or solid-state drive.
What the bracket changes
The enclosure adds the physical width and screw-hole pattern of a standard 3.5" drive while keeping the native SATA data and power connectors accessible. Its aluminium shell acts as a passive heatsink for the enclosed drive. No extra cables, adapters or software are included; the conversion is purely mechanical and electrical pass-through.
Capacity and headroom
The adapter imposes no capacity limit beyond what the installed 2.5" SATA drive provides. It handles the full SATA III 6 Gbit/s bandwidth, so drive performance is unchanged. The limiting factor is the 2.5" drive itself — height must not exceed the enclosure’s 1.01" internal clearance, and total length must fit within the 5.75" depth.
Highlights
- Aluminium body dissipates heat from your 2.5" drive
- Fits any 3.5" bay for internal PC installation
- Works as external enclosure for portable storage
- Compatible with HDD docking stations for quick access
- Supports SATA I, II and III drives
Specifications
| Brand | BYTECC |
|---|---|
| Model | 2535AU |
| Color | Black |
| Size | 3.5" |
| Type | Enclosure |
| Material | Aluminum |
| Internal Interface | SATA I/II/III |
| Features | Convert your 2.5" SATA HDD/SSD to a 3.5" SATA hard drive for 3 purposes: Install it in 3.5" drive bay in your PC case Use it as an External HDD/SSD enclosure Use it as a 3.5" HDD on your HDD Docking station Support any 2.5" HDD/SSD up to 12.5mm in height Fully SATA 3.0 revision. Support SATA I/II/III (1.5; 3.0; 6.0 Gbps) Aluminum alloy case with heatsink design for fast heat release Fits for all 3.5" drive bay with SATA interface Built in Micro USB 3.0 output for working as an HDD enclosure Hot swap capable 20mm x 6mm heat releasing fan with 2 pin power cable can be installed. (Optio |
| Dimensions | 1.01" x 4.00" x 5.75" |
Questions about this item
Will the aluminum housing need any maintenance or replacement parts over time?
The aluminum frame has no moving parts or serviceable components, so no scheduled maintenance or replacement parts are required.
What is the first limit you hit when the enclosure runs continuously in a 3.5" bay?
The 1.01-inch height leaves minimal airflow clearance, so drive temperature becomes the limiting factor before any interface bottleneck.
How much noise and heat does the all-metal body add when the drive spins all day?
The enclosure itself is silent and passively dissipates heat through the aluminum shell, so only the installed drive's own noise and warmth are present.
New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
