We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Galvanised steel test plug with long handle 7.5in for 6in pipe

Safe-T-Seal

Safe-T-Seal TTMP-6WF Test Plug Long-Reach Handle 7.5in 6in Pipe

SKU CH-21WG-D0Y3F

Test plug seals pipes up to 6 inches with a 7.5-inch handle and 35 psig air rating

  • Handles 35 psig air back-pressure for reliable testing
  • Withstands 70 ft of water head for high-pressure jobs
  • 5 in long-reach handle clears deep pipe access
  • Fits pipe IDs from .38 in to 6 in for wide range
  • Galvanised steel plate and handle resist corrosion in wet conditions

Test Plug for 6-Inch Pipe

The Safe-T-Seal TTMP-6WF is a mechanical test plug designed to seal a 6-inch pipe during pressure testing. It fits pipe inside diameters from 0.38 in up to 6 in. The 7.5 in overall height and galvanised steel construction suit plumbing contractors and maintenance crews who need a reusable, long-reach sealing tool.

Pressure Limits and Bypass

The plug withstands 35 psig of air back-pressure or 70 ft of water head. A 1/2 in female NPS bypass connection allows fluid introduction or pressure monitoring without removing the plug. Galvanised steel handle and plate resist corrosion during repeated wet use.

Water Fill Port and Compliance

A water fill port with hose is included for convenient hydrostatic testing. The product carries a California Proposition 65 warning for a chemical known to cause reproductive harm. Buyers needing a larger diameter seal or a different bypass thread size will require another solution.

Highlights

  • Handles 35 psig air back-pressure for reliable testing
  • Withstands 70 ft of water head for high-pressure jobs
  • 5 in long-reach handle clears deep pipe access
  • Fits pipe IDs from .38 in to 6 in for wide range
  • Galvanised steel plate and handle resist corrosion in wet conditions

Specifications

BrandSAFE-T-SEAL

Questions about this item

How do I install the Safe-T-Seal TTMP-6WF test plug and what step is often missed?

Insert the plug into the 6 in pipe so the galvanised steel plate seals against the inside diameter, then tighten the long-reach handle until the bypass connection is accessible; the step often missed is attaching the hose to the included water fill port before pressurising the line.

What maintenance or replacement will the Safe-T-Seal TTMP-6WF test plug need later?

Inspect the galvanised steel plate and handle for corrosion after each use, check the 1/2 in NPS female bypass threads for damage, and replace the plug if the sealing surface no longer holds the rated 70 ft of head water pressure.

What limit appears first when the Safe-T-Seal TTMP-6WF test plug is under sustained pressure?

The 35 psig maximum air back-pressure limit is reached before the 70 ft of head water limit, so sustained air testing will hit the pressure ceiling first.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.