We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminum 2.5 inch SATA enclosure for 25mm and 50mm mSATA drives

Sabrent

Sabrent mSATA to 2.5" SATA III Aluminum Enclosure Adapter 25mm 50mm

SKU CH-Z670-V74KB

Converts an mSATA SSD into a 2.5 inch SATA drive with an aluminum enclosure that fits 25 mm and 50 mm lengths

  • ColorBlack
  • TypeEnclosure
  • Internal InterfacemSATA
  • External InterfaceSATA
  • Number of Bay1 Bay
  • Converts mSATA drives to standard 2.5 SATA III form factor
  • Supports both 25 and 50 millimetre mSATA drive lengths
  • Aluminium enclosure shields the SSD from physical damage
  • Pass-through design lets the drive run at full SATA speed
  • Driver-free connection works with any laptop or desktop

mSATA to 2.5" SATA Enclosure Adapter

This Sabrent adapter converts an mSATA solid-state drive into a standard 2.5-inch SATA III form factor. The aluminum enclosure houses one drive bay and accepts both 25mm and 50mm mSATA modules. It connects to any laptop or desktop with a SATA port and requires no driver installation. The pass-through design lets the drive operate at its full SATA III 6Gbps capacity.

Upgrade from bare mSATA drive

The enclosure replaces a bare mSATA module that cannot fit a 2.5-inch drive bay or caddy. It adds mechanical protection and a standard SATA connector so the drive can be used in systems that only accept 2.5-inch SATA SSDs. The jump is worth it when you have a spare mSATA drive and need to install it in a laptop or desktop bay that expects a 2.5-inch SATA device.

Suits builders repurposing mSATA SSDs

This adapter suits anyone with a 25mm or 50mm mSATA drive who wants to use it in a 2.5-inch SATA slot. It is not for buyers who need to install an M.2 NVMe PCIe SSD, as the enclosure does not support that interface. It is also not for users who require an external USB enclosure, because the external interface is SATA only.

Highlights

  • Converts mSATA drives to standard 2.5 SATA III form factor
  • Supports both 25 and 50 millimetre mSATA drive lengths
  • Aluminium enclosure shields the SSD from physical damage
  • Pass-through design lets the drive run at full SATA speed
  • Driver-free connection works with any laptop or desktop

Specifications

ColorBlack
TypeEnclosure
Internal InterfacemSATA
External InterfaceSATA
Number of Bay1 Bay
Shipping weight0.07 kg
Package size147 × 117 × 13 mm

Questions about this item

Will a 25 mm or 50 mm mSATA drive fit inside the aluminum enclosure?

The enclosure accepts both 25 mm and 50 mm mSATA drives so either length mounts securely.

Which screws do I use to fasten the mSATA drive before closing the case?

Insert the drive into the mSATA slot, secure it with the included short screw, then fasten the two case halves together with the longer screws.

Does the aluminum housing need any thermal pads replaced over time?

No thermal pads are used; the bare aluminum acts as a passive heatsink and requires no maintenance.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.