Sabrent
Sabrent MBVB09TV1XPDD 10-bay 3.5 SATA accessory
A 10-bay tray-less dock holds ten 3.5 SATA drives with USB 3.2 Gen2 Type-C at 10 Gbps, aluminum cooling, two 120mm fans, hot-swap power switches, a locking key and a Kensington slot
- 10 tray-less bays accept 3.5 SATA drives instantly
- USB 3.2 Gen2 Type-C delivers up to 10 Gbps transfer speed
- 10 independent power switches enable hot-swapping single drives
- Two 120 mm fans plus aluminium frame keep drives cool
- Kensington slot and locking key secure the entire unit
10-Bay 3.5 SATA Docking Station
This Sabrent docking station holds up to 10 SATA hard drives in a tray-less aluminium chassis. It connects to a host via a USB 3.2 Gen2 Type-C port rated at 10 Gbps. Each bay has its own power switch, and two 120mm fans provide active cooling. A locking key and Kensington slot add physical security.
RAID-Free Multi-Bay Upgrade
The unit replaces single-bay docks or smaller multi-bay enclosures that lack independent power control per drive. The jump is worth it when you need simultaneous access to many 3.5-inch drives without hardware RAID overhead. Software RAID remains an option if the operating system supports it.
Host Port and Drive Compatibility Check
Verify that your computer has a USB Type-C or Type-A port able to run at USB 3.2 Gen2 speeds for full bandwidth. Confirm all drives are 3.5-inch SATA models, as no trays or adapters are included for other form factors. Ensure an AC outlet is available for the supplied power cord.
Highlights
- 10 tray-less bays accept 3.5 SATA drives instantly
- USB 3.2 Gen2 Type-C delivers up to 10 Gbps transfer speed
- 10 independent power switches enable hot-swapping single drives
- Two 120 mm fans plus aluminium frame keep drives cool
- Kensington slot and locking key secure the entire unit
Specifications
No published specifications for this item yet.
Questions about this item
How wide is the 10-bay 3.5 SATA docking station for rack or shelf mounting?
The unit holds ten 3.5 SATA drives in a single row; measure your shelf or rack opening against the full chassis width before buying.
Which cable do I use first when connecting the station to a host computer?
Plug the USB-C to USB-C cable into the USB 3.2 Gen2 Type-C port on the rear, then power on the main switch before inserting any drives.
When should I replace the two 120mm cooling fans?
Replace a fan if it becomes noisy, spins slower than the other, or stops moving air across the aluminum chassis and drive bays.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Kensington Desk Mount Cable Anchor K64613WW accessory
- Black
- Provides a secure a…
Panasonic CF-VDR291U laptop cooling pad
- Optical Drive
- Buffer Size: 2 MB B…
eReplacements PB992A-ER laptop battery 14.4V
- Battery
- Lithium-Ion



