We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Grey open-cell foam windshield cylinder 18cm long for Sennheiser ME66 K6

Rycote

Rycote 18cm Foam Windshield for Sennheiser ME66 K6

SKU CH-1T78-6R6XY

An 18 cm foam windshield for Sennheiser ME66 with K6, attenuating wind and pop noise by up to 20 dB

  • Reduces wind and pop noise by up to 20 dB with open-cell foam
  • Slip-on design fits Sennheiser ME66 with K6 power supply
  • 18 cm length covers standard 19 to 22 mm microphone diameters
  • Foam material shields capsule from harmful UV rays
  • Lightweight construction adds minimal bulk to shotgun microphone setup

Compatible Windshield for ME66 K6

The Rycote 18cm foam windshield is designed for the Sennheiser ME66 microphone paired with a K6 power supply. It slips over the shotgun capsule to reduce unwanted noise during field recording. Streamers and content creators using this specific microphone combination gain a dedicated wind-protection accessory.

18cm Length with 19-22mm Standard Hole

This windshield measures 18cm long and accepts a standard hole diameter between 19mm and 22mm. The dimensions match the ME66 with K6 housing so the foam seats securely without tape or adapters. Buyers with microphones outside this diameter range cannot use this windshield.

Up to 20dB Attenuation Under Sustained Wind

Open-cell acoustic foam delivers up to 20dB of pop and wind-noise suppression during continuous outdoor use. The material also shields the capsule from harmful UV exposure over long sessions. It maintains consistent attenuation without the high-frequency loss common in dense fur covers.

Highlights

  • Reduces wind and pop noise by up to 20 dB with open-cell foam
  • Slip-on design fits Sennheiser ME66 with K6 power supply
  • 18 cm length covers standard 19 to 22 mm microphone diameters
  • Foam material shields capsule from harmful UV rays
  • Lightweight construction adds minimal bulk to shotgun microphone setup

Specifications

No published specifications for this item yet.

Questions about this item

How much wind and pop noise does the 18 cm foam actually cut when it is on the ME66?

The open-cell foam is rated for up to 20 dB of attenuation, so strong gusts and plosives are reduced by that amount before they reach the capsule.

The spec lists a 19 to 22 mm hole range — what does that cover in practice?

That diameter range matches the barrel of the Sennheiser ME66 with its K6 power module, allowing a secure slip-on fit without tape or adapters.

Will the 18 cm length clear the end of the ME66 and K6 combination?

At 18 cm (7.08 in) long, the windshield fully covers the interference tube and the attached power supply, leaving no exposed grille.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.