Rybozen
Rybozen Wireless Range Extender 300 Mbps 2.4 GHz 2640 sq ft
Extends 2.4 GHz Wi-Fi to 2640 sq ft with 300 Mbps speeds and dual Ethernet ports for repeater or AP modes
- Wireless Data RatesIEEE 802.11n/b/g
- WPA/WPA2WEP, WPA, WPA2, WPA Mixed, WPS
- Operating Range2.4-2.4835 Ghz
- Extends coverage up to 2640 sq ft with 2.4 GHz band
- Delivers 300 Mbps data rates via IEEE 802.11n/b/g
- Two Ethernet ports enable Repeater and AP modes
- One-touch WPS button pairs instantly with existing router
- WPA2 encryption secures the network against unauthorised access
Rybozen 300 Mbps Wireless Extender
The Rybozen Wireless Range Extender operates on the 2.4 GHz band and supports IEEE 802.11n/b/g standards with data rates up to 300 Mbps. It is designed for homeowners and renters who need to push a stable Wi-Fi signal into rooms, garages or outdoor areas that the main router cannot reach. The device functions as a repeater or an access point, making it useful for both wireless extension and wired-to-wireless conversion. It is not for buyers who require dual-band or 5 GHz operation.
Thermals Noise and Power
The unit plugs directly into a wall outlet and uses integrated antennas, so there are no external moving parts or fan noise during operation. Power draw is limited to the low wattage typical of 2.4 GHz repeaters, keeping heat output minimal even with continuous use. The compact enclosure dissipates warmth passively across its surface. No active cooling or external power brick is involved.
Upgrade Path and When It Is Worth It
This extender replaces an older 802.11g repeater or a dead zone where no signal exists, adding up to 2640 sq ft of coverage and WPA2 security. The jump is worth it when a single 2.4 GHz network must serve smartphones, laptops, smart TVs and media players across multiple floors without running new cables. It does not suit homes that need mesh roaming, tri-band backhaul or bandwidth above 300 Mbps.
Highlights
- Extends coverage up to 2640 sq ft with 2.4 GHz band
- Delivers 300 Mbps data rates via IEEE 802.11n/b/g
- Two Ethernet ports enable Repeater and AP modes
- One-touch WPS button pairs instantly with existing router
- WPA2 encryption secures the network against unauthorised access
Specifications
| Wireless Data Rates | IEEE 802.11n/b/g |
|---|---|
| WPA/WPA2 | WEP, WPA, WPA2, WPA Mixed, WPS |
| Operating Range | 2.4-2.4835 Ghz |
Questions about this item
How do I install the extender using the WPS button?
Plug the unit into a mains socket, press the WPS button on your router, then press the WPS button on the extender within two minutes; the LED indicator will show when the link is established.
What maintenance will this extender need over time?
No scheduled maintenance is required; keep the vents clear of dust and reboot the device occasionally if throughput drops.
What limit appears first during sustained heavy use?
The 300 Mbps ceiling on the 2.4 GHz band caps throughput before any other constraint.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
