We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black USB 2.0 to SATA adapter cable 0.35m with copper core

Ruth's sister

Ruth's sister USB 2.0 SATA 2.5/3.5 inch internal power cable 0.35m

SKU CH-D5YN-ED8J2

Connects 2.5 or 3.5 inch SATA drives via USB 2.0 at up to 480 Mbps with a 0.35 m copper cable

  • Plug-and-play USB 2.0 connection requires no external power
  • 480 Mbps data transfer via INIC-1618L chip
  • Supports 2.5 and 3.5 inch SATA drives
  • Fits 9.5 mm and 12.7 mm notebook optical drives
  • 35 m copper-core cable keeps setup tidy

USB 2.0 SATA Drive Adapter

This cable adapter connects a 2.5 or 3.5 inch SATA drive to a PC through a USB 2.0 port. It uses an INIC-1618L chip and a copper-core cable measuring 0.35 metres. The unit supports hot-swap and plug-and-play operation without external power. It is built for notebook optical drives with a 6P+7P SATA interface.

Suits legacy optical drives.

The adapter fits notebook optical drives of 7 mm, 9.5 mm and 12.7 mm thickness that use the 6P+7P SATA connector. It also allows booting and system installation from the attached drive. Builders who need to connect internal 2.5 or 3.5 inch hard disks or SSDs for permanent installation should look at a different solution.

Transfer speed limited to USB 2.0 480 Mbps

The interface tops out at 480 Mbps, so large file transfers will be slower than with a native SATA connection. If your workflow demands higher sustained throughput, this adapter will not meet that need.

Highlights

  • Plug-and-play USB 2.0 connection requires no external power
  • 480 Mbps data transfer via INIC-1618L chip
  • Supports 2.5 and 3.5 inch SATA drives
  • Fits 9.5 mm and 12.7 mm notebook optical drives
  • 35 m copper-core cable keeps setup tidy

Specifications

No published specifications for this item yet.

Questions about this item

What practical speed limit does the USB 2.0 interface impose on this adapter?

The USB 2.0 interface caps throughput at 480 Mbps, so sustained transfers will not exceed that rate even if the drive is faster.

What drive thicknesses and form factors does the cable's connector support?

It fits 2.5 and 3.5 inch SATA drives and supports 7 mm, 9.5 mm and 12.7 mm optical-drive thicknesses via the 6P+7P SATA connector.

How is the adapter installed, and which step is commonly missed?

Connect the 6P+7P SATA plug to the drive, then insert the USB 2.0 plug into the PC; the step often missed is ensuring the SATA connector is fully seated on both the 6-pin and 7-pin rows before powering on.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.