We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ABS landing gear with white foam floats and nylon strap buckles for Mini 3 Pro drone

Ruth's sister

Ruth's sister Mini 3 Pro Landing Gear 60mm Water Extender Legs

SKU CH-K1ZH-MP8TS

Adds 60 mm height with floating rods for water take-offs and landings on a Mini 3 Pro, weighing only 32 g

  • Raises drone 60 mm for safe water landings with foam floats
  • Adds 25 mm ground clearance on sand or grass for uneven terrain
  • Weighs only 32 g so flight performance stays unaffected
  • Quick-release nylon straps allow fast tool-free fitting and reuse
  • ABS frame and foam rods give strength without adding bulk

Height-Enhancing Landing Gear

This landing gear set is designed for the Mini 3 Pro drone to increase ground clearance during take-off and landing. It raises the airframe by approximately 25mm above sand, grass or uneven terrain. The kit includes two gear legs and eight nylon strap buckles for secure attachment. Pilots seeking extra height on rough ground will find it suitable.

ABS Construction and Water Landing Capability

The legs are moulded from ABS plastic with foam floats, keeping the total added weight to about 32g. When the floating rods are fitted, the height increase reaches roughly 60mm, allowing operations from calm water surfaces. The nylon buckles enable quick installation and removal for repeated use. The lightweight design avoids adding significant flight burden.

Calm-Water Only Operation

The floating rods are rated for use on calm water only; wavy conditions create a risk of overturning during take-off or landing. Buyers who need to operate from moving water or rough seas cannot rely on this equipment. The height increments are fixed at the stated values and cannot be adjusted further. Manual measurement tolerances of 1-2cm apply to the dimensions.

Highlights

  • Raises drone 60 mm for safe water landings with foam floats
  • Adds 25 mm ground clearance on sand or grass for uneven terrain
  • Weighs only 32 g so flight performance stays unaffected
  • Quick-release nylon straps allow fast tool-free fitting and reuse
  • ABS frame and foam rods give strength without adding bulk

Specifications

No published specifications for this item yet.

Questions about this item

What height does the landing gear alone add to the Mini 3 Pro?

The landing gear alone raises the Mini 3 Pro by about 25 mm above the ground.

How much does the full set with floating rods weigh?

The complete bracket and floating rod assembly weighs only 32 g, adding minimal load to the aircraft.

How are the legs secured to the drone and can they be removed?

They attach with eight nylon strap buckles that clip on and off for quick installation and reuse.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.