We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Flat ribbon cable with multiple connectors on dark background

Ruth's sister

Ruth's sister INVC186 HITAHI UGM-A3 N10128F-8 K3021 0551EV internal power cable

SKU CH-NXX8-F8F4H

Connects high-pressure board INVC186 to 7-10 inch tablet LCD displays

  • High-pressure strip INVC186 for reliable power delivery
  • Compatible with Hitachi UGM-A3 boards for direct replacement
  • Supports 7 to 10 inch tablet LCD displays
  • Part numbers N10128F-8 and K3021 0551EV ensure correct fit

Internal Power Cable for Small Displays

This Ruth's sister cable carries the INVC186 HITAHI UGM-A3 part number and is built for 7 to 10 inch tablet LCD panels. It connects the display's high-pressure board to the host system without extra adapters. Installers working on compact industrial or embedded screens will find the fit direct and the routing simple.

Low-Profile Power Delivery

The thin conductor layout keeps voltage drop minimal across the short runs typical of 7 to 10 inch modules. Heat stays low enough that no active cooling is required in normal operation. The assembly adds negligible acoustic noise and draws only the current the panel demands.

Highlights

  • High-pressure strip INVC186 for reliable power delivery
  • Compatible with Hitachi UGM-A3 boards for direct replacement
  • Supports 7 to 10 inch tablet LCD displays
  • Part numbers N10128F-8 and K3021 0551EV ensure correct fit

Specifications

No published specifications for this item yet.

Questions about this item

How do I install the INVC186 high pressure strip onto the UGM-A3 board without damaging the 551 connector?

Align the N10128F-8 flex cable with the K3021 socket on the 0551EV high pressure board, press evenly along the 186-pin strip until seated, and verify the 10128 marking faces the display side before locking the latch.

When should I replace the INVC186 high pressure strip if the 7-10 inch tablet LCD shows pressure spots?

Replace the strip when persistent bright or dark spots appear along the 186-pin contact area, the 551 connector shows bent pins, or the K3021 board flex exceeds 2 mm during reassembly.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.