Ruth's sister
Ruth's sister International Power Cord 30g GD900 4.8 W/M-K
Thermal paste with 4.8 W/M-K conductivity, 30 g volume, operating from -58 to 392 °F
- High thermal conductivity at 4.8 W/M-K for efficient heat transfer
- Wide operating range from -58 to 392 degrees Fahrenheit suits extreme conditions
- 30 gram syringe provides ample paste for multiple CPU applications
- Non-conductive formula prevents electrical short circuits on components
- Gray color allows easy visual inspection of coverage and spread
Thermal paste for CPU and cooler contact
The GD900 compound fills microscopic gaps between a processor heat-spreader and a heatsink base. Its 4.8 W/M-K conductivity rating suits mainstream desktop CPUs and water-block cold plates. The 30 g syringe covers multiple applications for system builders or upgraders.
Check mounting pressure
Clean both mating surfaces with isopropyl alcohol and ensure no old compound remains. The paste is non-electrically conductive, so accidental contact with surrounding components will not cause shorts. Verify that your cooler mounting hardware provides even pressure across the die.
Sustained-load behaviour stays stable across
Operating range spans -58 to 392 degrees Fahrenheit without pump-out or drying. Specific gravity of 2.3 g/cc resists separation during long gaming or render sessions. Noise and fan dimensions are irrelevant to the paste itself.
Highlights
- High thermal conductivity at 4.8 W/M-K for efficient heat transfer
- Wide operating range from -58 to 392 degrees Fahrenheit suits extreme conditions
- 30 gram syringe provides ample paste for multiple CPU applications
- Non-conductive formula prevents electrical short circuits on components
- Gray color allows easy visual inspection of coverage and spread
Specifications
No published specifications for this item yet.
Questions about this item
What comes in the package and what do I need to buy separately?
The 30 g tube of GD900 thermal paste is supplied alone; no applicator, spreader or cleaning wipes are included, so purchase those separately if required.
Which capacity should I choose for a typical CPU installation?
The only size offered is the 30 g tube, which covers multiple processor applications and is the single option available.
What does the 4.8 W/M-K conductivity figure mean once the paste is on the CPU?
At 4.8 W/M-K the compound transfers heat efficiently between the processor and cooler, remaining stable from -58 °F to 392 °F.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



