We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black plastic adapter with NEMA 5-15P plug and C13 socket

Ruth's sister

Ruth's sister internal power cable NEMA 5-15P to C13 10A 2200W

SKU CH-X2CV-TA5XW

Converts a standard USA three-prong NEMA 5-15P outlet to an IEC 60320-C13 inlet, rated for 10 A at 110–220 V up to 2200 W

  • Connects C13 devices to standard US wall outlets via NEMA 5-15P plug
  • Handles up to 2200 W at 10 A across 110-220 V range
  • Male-to-female adapter converts IEC 60320-C13 to NEMA 5-15P without voltage change
  • Simple plug-and-play design needs no drivers or configuration
  • Compact plastic housing fits tight spaces inside cases or racks

Connector Type & Rating

This adapter links a C13 appliance inlet to a standard NEMA 5-15P wall plug. It carries a 10 A rating across a 110-220 V range for a maximum load of 2200 W. The moulded plastic housing meets the IEC 60320-320 and NEMA 5-15P form factors. No voltage conversion takes place; the device simply passes the supply through.

Indoor Equipment Builders

Suited for technicians fitting dual-voltage hardware such as server PSUs, UPS units or test gear inside a rack or bench where a C13 lead must meet a North-American outlet. Not intended for single-voltage appliances that cannot accept the local mains level, nor for permanent outdoor or high-vibration installations. Buyers needing a locking C13 or a higher current rating should look at a different connector family.

Pass-Through Only

The critical specification is that this adapter does not transform voltage or current. It will only operate correctly with equipment already rated for the full 110-220 V input range. Confirm the target device accepts the local supply before connecting.

Highlights

  • Connects C13 devices to standard US wall outlets via NEMA 5-15P plug
  • Handles up to 2200 W at 10 A across 110-220 V range
  • Male-to-female adapter converts IEC 60320-C13 to NEMA 5-15P without voltage change
  • Simple plug-and-play design needs no drivers or configuration
  • Compact plastic housing fits tight spaces inside cases or racks

Specifications

No published specifications for this item yet.

Questions about this item

Which connector variant matches my equipment?

This adapter provides a C13 female socket on one side and a NEMA 5-15P male plug on the other, rated for 10 A at 110-220 V.

What does the 2200 W rating mean for my device?

It represents the maximum continuous power the connector can handle; the adapter does not convert voltage, so the attached device must support the local mains voltage.

Which standard governs the C13 side and what current does it allow?

The C13 connector follows IEC 60320 and is rated for 10 A, limiting the adapter to that current regardless of the NEMA 5-15P plug rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.