We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 29 cm adapter cable with DC5.5×2.1 mm plug on one end and small 4-pin fan connector on the other

Ruth's sister

Ruth's sister DC5521 to 4-pin fan power adapter cable 29cm

SKU CH-KJNN-YTT30

A 29 cm adapter cable that powers a 4-pin PWM fan from a DC 5.5 × 2.1 mm supply, using 24 AWG oxygen-free copper conductors rated for 300 V and 80 °C

  • Powers 4-pin fans from standard DC adapters via 5.5×2.1 mm jack
  • 29 cm oxygen-free copper cable keeps internal routing tidy
  • 24 AWG pure copper conductors rated for 300 V and 80 °C
  • Light 20 g build adds negligible weight to chassis
  • PVC-insulated 3.5 mm OD wire resists abrasion in tight spaces

DC5521 to 4-pin fan adapter cable

This 29 cm adapter connects a 4-pin PWM fan to a DC 5.5 × 2.1 mm barrel jack. It lets you run a chassis or CPU cooler fan from an external 12 V, 9 V or 5 V power supply instead of the motherboard header. The cable uses 24 AWG oxygen-free copper conductors with PVC insulation rated to 80 °C and 300 V.

Suits builders powering fans from wall adapters

Ideal for router heatsinks, external fan controllers or test benches where a mains-powered brick is more convenient than a motherboard header. Not suited for builds that need the motherboard to regulate fan speed through PWM signalling, because the barrel jack carries only power and ground.

Sustained load behaviour

The 17-strand 0.10 mm pure copper cores and 3.5 mm outer diameter handle continuous current within the 300 V rating without overheating. Voltage drop over the 29 cm length stays negligible for typical 12 V fan loads, so fan speed remains stable during long sessions.

Highlights

  • Powers 4-pin fans from standard DC adapters via 5.5×2.1 mm jack
  • 29 cm oxygen-free copper cable keeps internal routing tidy
  • 24 AWG pure copper conductors rated for 300 V and 80 °C
  • Light 20 g build adds negligible weight to chassis
  • PVC-insulated 3.5 mm OD wire resists abrasion in tight spaces

Specifications

No published specifications for this item yet.

Questions about this item

My fan has a small 4-pin connector — will the 4-pin end on this adapter fit it?

Yes, one end is a small 4-pin connector designed for standard chassis or CPU fan headers.

I want to power the fan from a 12 V DC barrel supply — does the 5.5 × 2.1 mm jack match common adapters?

The DC5521 end is a 5.5 mm outer, 2.1 mm inner barrel that fits typical 12 V, 9 V or 5 V power bricks.

After plugging everything in, how can I confirm the fan is receiving power correctly?

The fan should spin immediately; if it is a PWM model the speed will then respond to motherboard or controller signals.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.