We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Pair of compact BNC to RJ45 balun transceivers with short power leads

Ruth's sister

Ruth's sister BNC to RJ45 Passive Video Power Audio Balun Transceiver internal power cable

SKU CH-JG51-7HAJ0

A passive BNC-to-RJ45 balun pair transmits video, power and audio over UTP cable up to 6 MHz bandwidth

  • Transmits video, audio and power over standard UTP cable
  • Passive design needs no external power supply
  • Built-in transient protection rejects common-mode noise up to 60 dB
  • Compact 43×22×21 mm housing fits tight camera enclosures
  • Operates reliably from -10 °C to +70 °C

CCTV Video Audio Power Balun Pair

This pair of passive transceivers converts BNC video, audio and 12 V DC power signals to run over a single UTP cable with RJ45 connectors. It is designed for installers who want to simplify CCTV cabling by replacing coaxial runs with standard CAT5 wiring. The units handle both sending and receiving roles without external power.

Passive UTP Distance And Signal Limits

Video bandwidth extends from DC to 6 MHz with 60 dB common-mode rejection between 15 kHz and 6 MHz. The baluns accept NTSC, PAL, CCIR and SECAM baseband formats and operate from -10 °C to +70 °C. Because they are passive, maximum cable length depends on the UTP quality and the camera’s own drive capability.

BNC Male And RJ45 Impedance Match

Each unit presents a 75 Ω BNC male interface for coaxial equipment and a 100 Ω RJ45 interface for the twisted-pair link. This fixed impedance pairing determines whether the balun will work with a given camera and recorder combination.

Highlights

  • Transmits video, audio and power over standard UTP cable
  • Passive design needs no external power supply
  • Built-in transient protection rejects common-mode noise up to 60 dB
  • Compact 43×22×21 mm housing fits tight camera enclosures
  • Operates reliably from -10 °C to +70 °C

Specifications

No published specifications for this item yet.

Questions about this item

Should I use this balun pair with CAT5 or CAT6 UTP cable?

The balun is designed for standard UTP cable systems such as CAT5 with RJ45 connectors to carry video, audio and DC 12V power over a single run.

What video quality can I expect over a long UTP run?

Real-time monochrome or colour transmission of PAL, NTSC or SECAM baseband signals with a frequency response of DC to 6MHz and 60dB common-mode rejection from 15kHz to 6MHz.

Does the RJ45 connector carry Ethernet data or only the balun signals?

The RJ45 port is a UTP data connector rated at 100 ohms impedance for the balun's video, audio and power signals; it does not pass Ethernet traffic.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.