Ruth's sister
Ruth's sister banana plug terminals 13mm 19mm 45mm
Gold-plated spindle terminals accept 4 mm banana plugs or direct crimping, with 13 mm panel holes spaced 19 mm apart and 45 mm overall length
- Gold-plated spindle ensures clean signal transfer
- 13 mm panel holes fit standard amplifier chassis
- 19 mm hole spacing matches common binding-post layouts
- 45 mm total length suits compact DIY enclosures
- Accepts 4 mm banana plugs or direct crimping for flexible wiring
13 mm panel-mount banana terminals
A pair of gold-plated alloy binding posts designed for DIY amplifier chassis. Each terminal accepts a 4 mm banana plug or a direct crimp connection. The set includes one red and one black connector for clear channel identification. Installation fits panels thinner than 6 mm.
3 mm crimp hole and 5 mm screw shaft
The single specification that determines compatibility is the 3 mm crimp hole perpendicular to the terminal. It dictates the maximum wire gauge that can be crimped directly. The 5 mm screw shaft diameter and 19 mm foot spacing must match the panel cut-out.
19 mm hole spacing and 45 mm total length
The 19 mm centre-to-centre hole spacing and 45 mm overall length define the mounting footprint. This comfortably handles standard stereo amplifier panels. It runs out when a chassis requires wider spacing or a longer terminal body.
Highlights
- Gold-plated spindle ensures clean signal transfer
- 13 mm panel holes fit standard amplifier chassis
- 19 mm hole spacing matches common binding-post layouts
- 45 mm total length suits compact DIY enclosures
- Accepts 4 mm banana plugs or direct crimping for flexible wiring
Specifications
No published specifications for this item yet.
Questions about this item
What does the 45 mm total length mean when the terminal is mounted in my amplifier chassis?
The 45 mm is the overall length from the front panel face to the rear end of the spindle, so allow at least that depth behind the panel.
What does the 13 mm panel-hole diameter and 19 mm hole spacing cap in practice?
You need two 13 mm holes spaced 19 mm centre-to-centre; the terminal fits panels up to 6 mm thick and accepts 4 mm banana plugs or direct wire crimping via the 3 mm perpendicular hole.
What physical clearance does the 19 mm foot distance require inside the case?
The 19 mm foot distance matches the panel hole centres, so the mounting nuts and washers sit within that same 19 mm span behind the panel.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115797BTC
In stock
