We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green PCI-E 1x to 16x riser board with blue USB 3.0 cable and SATA power connector

Ruth's sister

Ruth's sister 60CM PCI-E 1X to 16X Riser Cable with SATA Power

SKU CH-ESGR-DHE9Q

Extends a PCI-E 1x slot to 16x with a 60 cm USB 3.0 cable and SATA power for stable GPU operation

  • Extends a PCI-E 1x slot to 16x for GPU mounting
  • 60 cm USB 3.0 cable keeps signal quality over distance
  • 4-pin SATA power connector feeds the card directly
  • Three solid capacitors stabilise voltage for reliable operation
  • Side clip secures the adapter inside the chassis

60 cm PCIe 1x to 16x Riser Cable

This 60 cm riser cable connects a graphics card to a motherboard PCIe 1x slot using a USB 3.0 extender. It includes a SATA power connector and three solid capacitors to deliver stable power to the card. A side clip helps secure the installed card.

Suits builders mounting a GPU away from the board

The cable fits standard 1x, 4x, 8x and 16x motherboard slots and requires no driver installation. It is not for users who need a direct board-mounted connection or who lack a free SATA power header from the power supply.

Plug the board adapter into a 1x slot

Connect the USB 3.0 cable between the two boards, then plug the SATA power lead into the supply. The most common issue is forgetting the external power connection, which leaves the graphics card unpowered.

Highlights

  • Extends a PCI-E 1x slot to 16x for GPU mounting
  • 60 cm USB 3.0 cable keeps signal quality over distance
  • 4-pin SATA power connector feeds the card directly
  • Three solid capacitors stabilise voltage for reliable operation
  • Side clip secures the adapter inside the chassis

Specifications

No published specifications for this item yet.

Questions about this item

What motherboard slot is required for the PCI-E 1x to 16x adapter board?

The adapter board plugs into any 1x, 4x, 8x or 16x PCI-E slot on the motherboard.

Can the 60 cm USB 3.0 extender cable reach a graphics card mounted vertically in a full-tower case?

The 60 cm cable is designed for typical horizontal or moderate vertical routing; measure your specific case layout to confirm.

How do I verify the three FP solid capacitors are delivering stable power after installation?

The on-board LED lights when the SATA power connector is energised, confirming the capacitors are active.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.