We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 22 cm power cable splitting one 6-pin and one 8-pin into two 6+2 PCIe connectors

Ruth's sister

Ruth's sister 6 Pin 8Pin to Dual PCIe 8 Pin 6+2 22cm internal power cable

SKU CH-EXR8-P1TSG

Splits one 6-pin or 8-pin PSU connector into two 6+2-pin PCIe plugs for graphics cards using oxygen-free copper wire over 22 cm

  • Splits one 6-pin or 8-pin connector into two PCIe 6+2 power feeds
  • 22 cm length keeps cable routing tidy inside compact cases
  • Oxygen-free copper conductors deliver stable current to the graphics card
  • Weave sleeve protects wires from abrasion and sharp edges
  • Weighs only 0.032 kg, adding minimal mass to the build

Dual PCIe 8-pin adapter for graphics cards

This 22 cm cable splits a single 6-pin or 8-pin PCIe connector into two 6+2-pin PCIe plugs, letting you power a graphics card that needs dual connectors from one PSU lead. It uses oxygen-free copper conductors inside a woven sleeve for durability and flexibility. The adapter targets builders whose power supply lacks enough native PCIe outputs for their GPU.

Simple plug-in fitting with one wiring caution

Each end mates directly with standard PCIe headers so no tools or soldering are required; the 22 cm length reaches most routing paths in mid-tower cases. The only common issue is exceeding the source connector’s current rating when the card draws heavy load on both branches, so verify your PSU rail limits before relying on the splitter.

Steady delivery within the source rail’s capacity

Under sustained gaming or compute workloads the cable passes power without added regulation, so voltage drop stays proportional to the total current and the 22 cm oxygen-free copper run. It does not increase the amperage available from the PSU; both plugs share the single 6-pin or 8-pin feed, making the adapter unsuitable for cards whose combined draw exceeds that connector’s specification.

Highlights

  • Splits one 6-pin or 8-pin connector into two PCIe 6+2 power feeds
  • 22 cm length keeps cable routing tidy inside compact cases
  • Oxygen-free copper conductors deliver stable current to the graphics card
  • Weave sleeve protects wires from abrasion and sharp edges
  • Weighs only 0.032 kg, adding minimal mass to the build

Specifications

No published specifications for this item yet.

Questions about this item

How can I confirm the cable is delivering power correctly after connecting it to my graphics card?

The system should boot and the GPU should be detected without power-related errors or instability under load.

What connectors are included and do I need any additional adapters?

The cable has one 8-pin/6-pin PCIe female end and two 6+2-pin PCIe male ends; no extra adapters are required if your PSU has a matching 6-pin or 8-pin output.

Which version should I choose if my power supply only has a single 6-pin PCIe connector?

This splitter is designed to connect to one 6-pin or 8-pin PSU connector and split into two 6+2-pin PCIe plugs for the graphics card.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.