We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40 cm PWM fan hub splitter with five 4-pin connectors and nylon-sleeved cable

Ruth's sister

Ruth's sister 40cm 1-to-5 4-pin PWM Fan Hub Power Extension Cable Splitter

SKU CH-CAND-DKDQG

Splits one motherboard 4-pin header into five PWM fan connections using 40 cm oxygen-free copper cables

  • Connect five PWM fans to one motherboard header
  • 40 cm braided cable reaches across full-size cases
  • 22 AWG tinned copper conductors handle fan currents safely
  • 80 °C rated PVC insulation resists internal heat
  • 17 g lightweight hub adds minimal strain to headers

40 cm PWM Fan Hub Splitter

This 40 cm cable turns one motherboard 4-pin header into five fan connections. It is aimed at PC builders who need to run several case or CPU coolers from a single PWM source. The hub handles both 3-pin and 4-pin fans for mixed cooling setups.

Oxygen-Free Copper Wires in Nylon Mesh

Each lead uses 22 AWG 1007 wire with 17 strands of 0.12 mm tinned copper wrapped in black PVC insulation. The 40 cm loom is sheathed in a wrapped nylon mesh that resists abrasion and keeps routing tidy inside the chassis. Five connectors join at a compact 5 cm by 1.8 cm hub block.

Passive Hub Runs Cool and Quiet

No active electronics mean the adapter adds no fan noise and draws no extra power beyond the fans themselves. Wires are rated for 80 °C continuous operation so they stay safe near hot components. The first port passes the CPU fan signal while the remaining four provide standard PWM control.

Highlights

  • Connect five PWM fans to one motherboard header
  • 40 cm braided cable reaches across full-size cases
  • 22 AWG tinned copper conductors handle fan currents safely
  • 80 °C rated PVC insulation resists internal heat
  • 17 g lightweight hub adds minimal strain to headers

Specifications

No published specifications for this item yet.

Questions about this item

Does the 4-pin PWM hub pass speed control to all five fan headers?

Yes, the hub connects to the motherboard 4-pin CPU fan header and forwards the PWM signal to each of the five outputs so every attached fan responds to the same speed curve.

What clearance does the 5 cm × 1.8 cm hub housing need inside the case?

The hub body measures 5 cm long by 1.8 cm wide, so allow at least that much flat space behind the motherboard tray or in a cable-routing channel for the connector block to sit without bending the 40 cm leads.

Which header should I plug the CPU cooler into for proper RPM reporting?

Connect the CPU cooler to the dedicated first header labelled for the CPU fan; the remaining four headers are standard PWM fan outputs that follow the same signal but do not report speed back to the motherboard.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.