We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 40 cm PWM fan hub with one Molex input and five 4-pin outputs

Ruth's sister

Ruth's sister 40cm 1-to-5 4-pin Molex PWM fan hub power splitter cord

SKU CH-3WN3-92B6M

A 40 cm cable expands one motherboard PWM header to five fans with shared speed control

  • Expands one PWM header to five fans
  • 40 cm cable aids tidy cable routing
  • Self-adhesive mount lets you hide the PCB
  • Channel one reports RPM to the motherboard
  • Works with 3-pin and 4-pin fan connectors

Fan Hub for Multi-Fan Builds

This PWM splitter expands a single motherboard header to drive up to five fans. It suits enthusiasts who need coordinated speed control across several chassis coolers. The 40 cm cable length helps with internal routing. Self-adhesive backing allows the PCB to be secured out of sight.

PWM Signal Shared Across Five Ports

All connected fans follow the identical PWM signal from the motherboard. Only the CPU Fan channel passes an RPM signal back to the board, so monitoring software reports the speed of the fan plugged into channel one. Three-pin fans run at full speed because they lack PWM control pins.

Sustained Operation Without Speed Drift

Because every fan receives the same PWM duty cycle, speeds remain locked together during prolonged loads. The hub draws power directly from a Molex connector, removing the current limit of the motherboard header. No RPM feedback from channels two to five means the board cannot react to individual fan stalls.

Highlights

  • Expands one PWM header to five fans
  • 40 cm cable aids tidy cable routing
  • Self-adhesive mount lets you hide the PCB
  • Channel one reports RPM to the motherboard
  • Works with 3-pin and 4-pin fan connectors

Specifications

No published specifications for this item yet.

Questions about this item

How many fans can run from one motherboard PWM header using this splitter?

One 4-pin motherboard PWM header can drive up to five fans through this hub, all following the same PWM signal.

What happens to RPM monitoring when five fans are connected?

Only the fan plugged into the CPU Fan channel (channel 1) sends an RPM signal back to the motherboard; the other four channels do not report speed.

What length and mounting aid does the cable include?

The cable is 40 cm long and comes with a self-adhesive pad so the small PCB can be stuck inside the case for tidy routing.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.