We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 4-pin IDE to five SATA power splitter cable, 60 cm length

Ruth's sister

Ruth's sister 4-pin IDE to 5 SATA power splitter cable 60cm internal power cable

SKU CH-W8EQ-F9MQ8

Converts one 4-pin IDE connector into five SATA power plugs for multiple drives, 60 cm total length with 18 AWG tinned-copper wire

  • Converts one 4-pin IDE connector into five SATA power outputs
  • 60 cm total length with 20 cm main and 10 cm branch cables
  • 18 AWG tinned-copper conductors for reliable current delivery
  • Black 1007-spec wiring keeps internal builds tidy
  • Lightweight 42 g design adds minimal strain to power supply connectors

Power-splitter purpose

This 4-pin IDE to five SATA power splitter cable lets a single legacy Molex connector feed up to five SATA hard drives or SSDs. It is built for DIY PC and server builders who need more SATA power ports than their power supply provides. The 60 cm total length includes a 20 cm main lead and four 10 cm branches.

Upgrade path

It replaces the practice of daisy-chaining multiple Molex-to-SATA adapters or hunting for a power supply with extra native SATA plugs. The jump is worth it when a chassis has limited cable routing space and the builder wants one tidy harness instead of several loose dongles. The 18 AWG tinned-copper conductors handle the combined load without voltage drop.

Build integration

The male 4-pin D-port plugs into any standard peripheral power lead from the supply, while the five female 15-pin SATA heads connect directly to drive backplanes or individual drives. Black 1007-series insulation blends into dark interiors and the 42 g weight adds negligible strain to the power-supply connector. No additional adapters or tools are required for installation.

Highlights

  • Converts one 4-pin IDE connector into five SATA power outputs
  • 60 cm total length with 20 cm main and 10 cm branch cables
  • 18 AWG tinned-copper conductors for reliable current delivery
  • Black 1007-spec wiring keeps internal builds tidy
  • Lightweight 42 g design adds minimal strain to power supply connectors

Specifications

No published specifications for this item yet.

Questions about this item

Will the 60 cm total length with a 20 cm main line and 10 cm branches reach my drive bays?

The main line is 20 cm and each of the four branch lines is 10 cm, so measure from your power supply connector to the furthest drive bay to confirm.

How do I connect the 4-pin IDE plug and the five SATA female heads without forcing them?

Align the keyed 4-pin IDE connector with the PSU socket and press straight in; then push each SATA female head onto the drive until it clicks — do not twist.

When should I replace the 18 AWG tinned-copper cable?

Replace it if the black insulation cracks, the connectors feel loose, or you see any discolouration on the pins after extended use.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.