We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Three black 200mm cables with large 4-pin male to small 4-pin female connectors

Ruth's sister

Ruth's sister 3pcs 4 Pin Molex IDE Male to 4P ATA Female Power Cable to Floppy Drive Adapter 200mm

SKU CH-96SG-PGT9K

Three 200 mm cables convert a standard Molex connector to a floppy-drive power plug for legacy drives or CF-card adapters

  • Converts Molex to floppy power for legacy drives
  • 200mm length fits tight chassis routing
  • Three cables included for multiple device connections
  • Powers CF-card adapters replacing mechanical hard drives
  • Supplies auxiliary power to 1394 and graphics cards

Three-piece Molex-to-floppy power adapter kit

This set includes three 200 mm cables that convert a standard large four-pin Molex connector into a small four-pin floppy-drive power plug. Each adapter lets you supply power to legacy floppy drives or compact-flash cards from a modern PSU. The kit suits retro builders and soft-router projects running DOS or Windows 98.

Male Molex to female floppy connectors

The large four-pin male end plugs into any available Molex lead from the power supply, while the small four-pin female end mates with floppy drives or peripheral cards that require the smaller interface. The 200 mm length provides enough reach for typical drive-bay routing without excess slack. No extra certification markings are present on the cables.

Check Molex availability and device power needs

Verify that your power supply has at least one free Molex connector for each adapter you plan to use. Confirm that the target device — whether a floppy drive, CF-card adapter or 1394 card — expects power through a small four-pin floppy-style socket. The cables do not convert voltage, so the PSU must already deliver the correct rail for the attached hardware.

Highlights

  • Converts Molex to floppy power for legacy drives
  • 200mm length fits tight chassis routing
  • Three cables included for multiple device connections
  • Powers CF-card adapters replacing mechanical hard drives
  • Supplies auxiliary power to 1394 and graphics cards

Specifications

No published specifications for this item yet.

Questions about this item

What is the length of the Molex-to-floppy power cable?

The cable is 200 mm long, providing a short reach from a standard 4-pin Molex connector to a floppy-drive-style 4-pin power input.

What connector types does the adapter use for the floppy drive end?

The adapter terminates in a small 4-pin female ATA connector, matching the traditional floppy-drive power interface found on legacy drives and some expansion cards.

How do I connect the three adapters to my power supply?

Plug each male Molex end into a spare 4-pin Molex lead from the PSU, then attach the female floppy connector to the device needing auxiliary power.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.