Ruth's sister
Ruth's sister 250W Gold ATX PSU 20+4Pin 4Pin CPU 3 SATA 100-240V
250 W Gold-rated ATX power supply with 20+4-pin motherboard, 4-pin CPU and three SATA connectors for compatible Dell desktops and servers
- Delivers 250W with 80 PLUS Gold efficiency
- Active PFC corrects power factor for stable output
- Fits Dell 390, 790, 990, 3010, 7010, 9010 desktops
- Includes 20+4 pin, 4 pin CPU and three SATA connectors
- Non-modular design keeps cabling simple and secure
250W Gold ATX power supply for Dell DT chassis
This 250 watt unit carries 80 PLUS Gold certification and active power-factor correction across a 100 to 240 volt input range. It fits the Dell 390, 790, 990, 3010, 7010 and 9010 desktop towers. The non-modular cable set provides one 20+4 pin motherboard connector, one 4 pin CPU connector and three SATA power leads. No PCIe graphics connectors are included.
Replaces OEM 250W PSUs such as L250PS-00.
Match the original when the output voltage, current and connector shape on the adapter body are the same or higher. The jump is worth it if the existing supply has failed, shows voltage drift or lacks Gold efficiency. Spare part numbers 07GC81, 0K2H58, 0DY72N, 0HY6D2, 0CYY97, 04M and 8GF cross-reference to this model.
Verify chassis clearance
The unit measures 17.5 by 8.5 by 6.5 centimetres and uses a fixed cable harness. Confirm the case can accommodate these dimensions and that the 4 pin CPU lead reaches the motherboard socket. Systems requiring a dedicated graphics power connector or more than three SATA devices cannot use this supply.
Highlights
- Delivers 250W with 80 PLUS Gold efficiency
- Active PFC corrects power factor for stable output
- Fits Dell 390, 790, 990, 3010, 7010, 9010 desktops
- Includes 20+4 pin, 4 pin CPU and three SATA connectors
- Non-modular design keeps cabling simple and secure
Specifications
No published specifications for this item yet.
Questions about this item
Will the 17.5 cm × 8.5 cm × 6.5 cm unit fit my Dell OptiPlex 390, 790 or 990 DT chassis?
The supply matches part numbers 07GC81, 0K2H58, 0DY72N, 0HY6D2, 0CYY97, 04M and 8GF and is listed for Dell 390, 790, 990, 3010, 7010 and 9010 DT models.
Which cables must I connect during installation, and what is the common mistake?
Plug the 20+4 pin motherboard connector, the long 4-pin CPU connector and up to three SATA drives; the frequent error is leaving the 4-pin CPU cable unplugged because the board still powers on without it.
What upkeep does the non-modular 250 W Gold unit need over time?
Vacuum the intake grille periodically and listen for bearing noise; the internal fan is the only moving part and cannot be user-swapped without opening the sealed PSU.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



