We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular Bluetooth LED controller with DC connector and wiring

Ruth's sister

Ruth's sister 21-key Bluetooth LED controller internal power cable

SKU CH-TG82-48WS1

Controls 5050, 2835, WS2811 and WS2812B LED strips via Bluetooth or IR up to 15 metres

  • Control LED strips from 15 metres away via Bluetooth
  • Adjust brightness from 0 to 100 percent with 21-key remote
  • Works with 5 V to 24 V power supplies
  • Compatible with 5050, 2835, WS2811 and WS2812B strips
  • Compact 85 by 40 by 6 mm design weighs 38 g

21-key Bluetooth LED controller

This 21-key Bluetooth LED controller manages RGB, RGBW and RGBWW strips from a single DC head interface. It accepts a 5 V to 24 V supply and drives 5050, 2835, WS2811 and WS2812B tape through the Magic Home ecosystem. The unit measures 85 mm by 40 mm by 6 mm and weighs 38 g. Infrared and Bluetooth give a 15 m control range.

Capacity and headroom

The controller dims from 0 % to 100 % across the full 5 V to 24 V window, so short runs and long reels both stay within spec. Addressable WS2811 and WS2812B strips draw more current per metre; the 24 V ceiling limits total wattage before voltage drop appears on very long lengths. It is not suited for builders who need more than 24 V input or individual pixel mapping beyond the built-in modes.

Build integration

A three-core wire connects the DC head to the strip, leaving the PCI bracket slot free for other cards. Infrared and Bluetooth share the same 15 m radius, so the controller can sit behind a side panel without line-of-sight. IP20 rating means it stays inside the chassis, away from moisture. No extra driver software is required beyond the Magic Home app.

Highlights

  • Control LED strips from 15 metres away via Bluetooth
  • Adjust brightness from 0 to 100 percent with 21-key remote
  • Works with 5 V to 24 V power supplies
  • Compatible with 5050, 2835, WS2811 and WS2812B strips
  • Compact 85 by 40 by 6 mm design weighs 38 g

Specifications

No published specifications for this item yet.

Questions about this item

Will the 21-key Bluetooth controller work with my existing 5050 and WS2812B LED strips without rewiring?

Yes, the controller supports 5050, 2835, WS2811 and WS2812B strips via its 3-core DC head connection and 5-24 V input range.

How can I verify the controller is operating correctly after installation?

Pair it over Bluetooth within 15 metres, then use the 21-key remote or Magic Home app to cycle colours and dim from 0 to 100%; the LEDs should respond instantly.

Does the package include the LED strips or a power supply, or must I buy them separately?

Only the 85×40×6 mm, 38 g controller with its 3-core DC cable is included; LED strips and a 5-24 V power source must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.