Ruth's sister
Ruth's sister 17 key RF RGB controller internal power cable
A 17-key RF RGB controller with 433 MHz wireless remote, 3-channel PWM dimming, 19 dynamic modes and 20 static colours for 5-24 V LED strips
- 17-key RF remote controls LED strips from up to 433 MHz away
- PWM dimming delivers smooth 20-colour and 19-mode lighting effects
- Wide 5 V to 24 V input fits most low-voltage LED installations
- Compact 43 × 12 × 5 mm controller tucks inside tight cases
- 115 mm DC lead reaches nearby power headers without strain
17-key RF RGB controller for LED strips
This compact controller manages single-colour or RGB LED strips using a 433 MHz wireless remote. It accepts a wide 5 V to 24 V DC input and drives three output channels with PWM dimming. The unit suits DIY lighting projects, case-mod accent lighting or signage where a small footprint and simple wiring are required.
20 static colours and 19 dynamic modes
Users can select five brightness levels per static colour or choose from breathing, strobe, flash and other animated patterns with ten speed steps. The controller remembers the last setting after power loss. It operates reliably between -20 °C and 60 °C, making it suitable for indoor and sheltered outdoor installations.
115 mm DC lead and 43×12×5 mm controller
The controller board measures 43 mm long, 12 mm wide and 5 mm high, weighing 22.5 g. A 115 mm DC pigtail connects to the power source and LED load. The handheld remote measures 86×40×7 mm. Buyers needing longer leads, higher current per channel or addressable-pixel control should look for a different controller.
Highlights
- 17-key RF remote controls LED strips from up to 433 MHz away
- PWM dimming delivers smooth 20-colour and 19-mode lighting effects
- Wide 5 V to 24 V input fits most low-voltage LED installations
- Compact 43 × 12 × 5 mm controller tucks inside tight cases
- 115 mm DC lead reaches nearby power headers without strain
Specifications
No published specifications for this item yet.
Questions about this item
Will this 17 key RF RGB controller work with the 12 V LED strips I already have installed?
Yes, the controller accepts a 12 V to 24 V wide voltage input so it will drive your existing 12 V strips without any extra hardware.
How can I verify the 433 MHz remote is paired correctly after I install the controller?
Press any colour key on the remote; the connected LED strips should change colour instantly, confirming the RF link is active.
Does the package include a power supply for the 5 V output or do I need to buy one separately?
The box contains the controller, the 115 mm DC lead and the remote; a 12 V to 24 V power source must be supplied by you.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114829BTC
In stock
