We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Twelve PCIe 6-pin to 8-pin cables with breakout board and LED display

Ruth's sister

Ruth's sister 12pcs PCIe 6Pin to 8Pin 18AWG Breakout Board 750W 1200W

SKU CH-BYP5-EZHBM

A 12-piece set of 18 AWG PCIe 6-pin to 8-pin cables with a breakout board supporting up to 1200 W and dual PSU start

  • 12 PCIe 6-pin to 8-pin cables for multi-GPU setups
  • 18 AWG conductors handle up to 1200 W per board
  • Built-in voltmeter LED display shows real-time voltage
  • Supports dual PSU start-up via 4-pin connector
  • Compatible with 11 listed server PSU models

Breakout board for GPU mining rigs

This PCIe breakout board converts a single server power supply into twelve 6-pin to 8-pin connectors for graphics cards. It is built for miners and builders who run multiple GPUs from one high-wattage PSU. A voltmeter LED display shows the 12 V rail voltage at a glance. Dual PSU start-up is supported through a small 4-pin connector.

Handles twelve cards up to 1200 W

The board is rated for 750 W and 1200 W operation with up to twelve PCIe cables attached. It runs out of headroom when total GPU draw exceeds the 1200 W limit or when more than twelve cards are required. Compatible server PSUs include models such as DPS-1200FB A, DPS-1200QB A, HSTNS-PL12, HSTNS-PL18 and PS-2751-5Q up to 1600 W capacity.

18 AWG cables with on-board button

Twelve 18 AWG power cables ship with the board for immediate installation. The integrated power button lets you cycle the rig without reaching the PSU switch. Mounting uses the existing PSU screw holes, so no extra brackets are needed. Buyers who need more than twelve GPU connections or non-server ATX power supplies cannot use this board.

Highlights

  • 12 PCIe 6-pin to 8-pin cables for multi-GPU setups
  • 18 AWG conductors handle up to 1200 W per board
  • Built-in voltmeter LED display shows real-time voltage
  • Supports dual PSU start-up via 4-pin connector
  • Compatible with 11 listed server PSU models

Specifications

No published specifications for this item yet.

Questions about this item

Will the 12 PCIe connectors on the breakout board work with the DPS-1200FB A server power supply I already own?

Yes, the DPS-1200FB A is listed among the supported Common Slot models, so the board's 12 connectors will mate correctly.

How can I confirm the voltmeter LED display is showing the correct 12 V rail voltage after installation?

The on-board LED voltmeter displays the +12 V rail in real time; a steady reading near 12 V indicates the board is operating as intended.

Does the package include the 12 PCIe 6-pin to 8-pin cables, or must they be purchased separately?

The package contains the breakout board plus 12 pieces of 6-pin to 8-pin 18AWG power cables; no extra cables are required.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.