We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small cylindrical CCTV microphone with red power and white audio cables

Ruth's sister

Ruth's sister 12 V CCTV microphone pickup internal power cable

SKU CH-EB72-7KREK

12 V DC CCTV microphone with audio and power cables covers 5 to 40 m² at -43 dB sensitivity

  • High-sensitivity audio capture with -43 dB sensitivity at 1000 Hz
  • Covers 5 to 40 square metres listening range for room-scale monitoring
  • Simple plug-and-play installation with red power and white audio connectors
  • Operates on 12 VDC at 10 mA for low-power CCTV integration
  • High signal-to-noise ratio ensures clear sound for security recording

12 V CCTV microphone pickup

This DC 12 V microphone pickup captures audio for IP camera and DVR surveillance systems. It operates at 12 VDC with a 10 mA draw and includes red power and white audio connectors. The unit provides a listening range from 5 to 40 square meters.

Installers needing simple audio capture

Suited for security monitoring where a high-sensitivity microphone with plug-and-play setup is required. Not for users who need a longer cable run than supplied or who require a different operating voltage. Buyers wanting built-in recording storage should look elsewhere.

Plug-and-play installation

The microphone connects directly to the camera or DVR using the two colour-coded leads. No additional drivers or configuration are needed. The main issue is ensuring the 12 V supply is stable; incorrect polarity or voltage can damage the unit. Sensitivity is rated at -43 dB at 1000 Hz.

Highlights

  • High-sensitivity audio capture with -43 dB sensitivity at 1000 Hz
  • Covers 5 to 40 square metres listening range for room-scale monitoring
  • Simple plug-and-play installation with red power and white audio connectors
  • Operates on 12 VDC at 10 mA for low-power CCTV integration
  • High signal-to-noise ratio ensures clear sound for security recording

Specifications

No published specifications for this item yet.

Questions about this item

Does the microphone need a separate 12 V DC power supply to operate?

Yes, it requires a 12 V DC source capable of supplying at least 10 mA; the red connector carries power and the white connector carries the audio signal.

Can I connect this pickup directly to the RCA audio input on an older analogue DVR?

The white RCA plug carries line-level audio from the microphone, so it can feed any recorder or camera with a compatible RCA audio input.

How do I verify the unit is capturing sound after wiring it up?

Monitor the recorder’s audio channel; you should hear clear pickup from anywhere within the 5 to 40 square metre listening area, with a sensitivity of –43 dB at 1000 Hz.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.