Ruth's sister
Ruth's sister 100Mbps 5-48V 1A PoE Injector internal power cable
Combines power and data for 10/100/1000 networks using mode B passive PoE with 1A output
- Powers IP cameras and access points with flexible 5-48V input
- Delivers up to 1A output current for reliable device operation
- Compact 75x28x22mm ABS housing fits tight installation spaces
- Supports 10/100/1000 networks with passive PoE mode B always on
- Lightweight 0.02kg design simplifies mounting and cable management
Passive PoE injector for IP devices
This passive PoE injector combines power and data on a single Ethernet run for 10, 100 and 1000 Mbps networks. It accepts an input voltage from 5 to 48 V and delivers up to 1 A at the same voltage range. The unit operates in Mode B with power always present on the spare pairs. It works with any IEEE 802.3af compliant powered device.
Suitable for cameras, phones and access points
Installers powering IP security cameras, VoIP phones or wireless access points from a central supply will find this adapter convenient. It requires a separate power source matching the 5 to 48 V input range. Builders needing a plug-and-play injector with an integrated mains supply should look at a different product class.
1 A maximum output current
The injector is limited to 1 A continuous output across the 5 to 48 V range. Devices drawing more than 1 A will not operate reliably with this module. Check the powered device specification before purchase.
Highlights
- Powers IP cameras and access points with flexible 5-48V input
- Delivers up to 1A output current for reliable device operation
- Compact 75x28x22mm ABS housing fits tight installation spaces
- Supports 10/100/1000 networks with passive PoE mode B always on
- Lightweight 0.02kg design simplifies mounting and cable management
Specifications
No published specifications for this item yet.
Questions about this item
How do I verify the injector is delivering power after connecting my IP camera?
The status LED on the unit will illuminate when the 1A output is active and the connected device is drawing power through the PoE link.
What comes in the package and do I need any extra cables or power supplies?
The box contains one PoE injector module; you must supply your own 5-48V DC power source and Ethernet patch cables for the data and powered links.
Which voltage setting should I select for a 12V IP camera versus a 48V access point?
The injector passes the input voltage directly to the output, so use a 12V power supply for 12V devices and a 48V supply for 48V equipment.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115432BTC
In stock
