Ruth's sister
Ruth's sister 10 pcs Aluminum Heatsink 11x11x5 mm internal power cable
Pack of ten 11 mm aluminium 6063 heatsinks for Raspberry Pi 2.0 Model B chips and similar components
- Keeps Raspberry Pi 2.0 Model B cool during overclocking
- 10 aluminium 6063 heatsinks sized 11×11×5 mm included
- Extruded fins give efficient heat dissipation for CPU, RAM and power chips
- Lightweight shims fit VGA memory and other small electronic components
- 100 % brand-new condition ensures reliable thermal performance
10-piece aluminium heatsink set
This set supplies ten extruded aluminium heatsinks measuring 11 by 11 by 5 millimetres. They are intended for Raspberry Pi 2.0 Model B and for VGA memory chips. The aluminium 6063 construction provides lightweight thermal transfer for small electronic components. Each piece is brand new and ready for installation.
Critical dimension check: 11 x 11 x 5 mm
The single specification that decides fit is the 11 by 11 by 5 millimetre footprint and height. You must verify that the target chip package and surrounding clearance match these exact dimensions before purchasing. No other mounting hardware or thermal interface material is included in the pack.
Handles CPU, RAM, network and power chips
The heatsinks comfortably cover the main processor, memory, network and power regulation chips on a Raspberry Pi 2.0 Model B. They also suit generic LED or small IC cooling where the 11 millimetre square footprint fits. Thermal headroom is limited by the small mass and surface area, so sustained high-power loads will exceed their dissipation capacity.
Highlights
- Keeps Raspberry Pi 2.0 Model B cool during overclocking
- 10 aluminium 6063 heatsinks sized 11×11×5 mm included
- Extruded fins give efficient heat dissipation for CPU, RAM and power chips
- Lightweight shims fit VGA memory and other small electronic components
- 100 % brand-new condition ensures reliable thermal performance
Specifications
No published specifications for this item yet.
Questions about this item
How much will a 11 mm heatsink lower temperatures on a Raspberry Pi 2.0 Model B?
The 11x11x5 mm aluminium 6063 heatsinks attach to the CPU, RAM, network and power chips, increasing surface area so heat moves away faster during overclocking.
Does the thermal pad conduct electricity or only heat?
The included thermal interface is designed for heat transfer only; it is electrically non-conductive so it will not short adjacent pins on the board.
Will the 5 mm height clear the official Raspberry Pi case?
At 5 mm tall the heatsinks fit under the standard case lid, but verify your specific enclosure clearance before installing all ten pieces.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00114286BTC
In stock
