Ruth's sister
Ruth's sister 009S PCI-E riser card 1x to 16x USB 3.0 100cm SATA power internal power cable
Extends a PCI-E 1x slot to 16x using a 100cm USB 3.0 cable with SATA power and four solid capacitors for stable graphics operation
- Extends a PCIe 1x slot to 16x using a 100cm USB 3.0 cable
- Four solid capacitors stabilise graphics power delivery
- SATA 15-pin to 6-pin cable reduces motherboard load
- Gold-plated contacts improve connectivity and durability
- LED indicators show power and activity status
PCIe 1x to 16x extender for flexible GPU mounting
This riser kit converts a single PCIe 1x slot into a full-length 16x connector using a 100cm USB 3.0 cable. It targets builders who need to position a graphics card away from the motherboard in mining rigs, compact cases or custom open-air frames.
Four solid capacitors
The onboard capacitors stabilise the GPU power rail while the auxiliary cable draws current directly from the power supply, reducing load on the motherboard slot. Gold-plated contacts maintain reliable signalling across the 100cm link.
USB 3.0 cable limits bandwidth to PCIe Gen 3.0 1x
The extender works with 1x, 4x, 8x and 16x motherboard slots but cannot exceed the throughput of a single Gen 3.0 lane. Cards that require higher bandwidth or auxiliary 8-pin and 12-pin connectors will not operate at full potential.
Highlights
- Extends a PCIe 1x slot to 16x using a 100cm USB 3.0 cable
- Four solid capacitors stabilise graphics power delivery
- SATA 15-pin to 6-pin cable reduces motherboard load
- Gold-plated contacts improve connectivity and durability
- LED indicators show power and activity status
Specifications
No published specifications for this item yet.
Questions about this item
Will the 12.2 cm PCI-E 16X card fit next to the 1x slot on my older motherboard?
The 12.2 cm card uses a 100 cm USB 3.0 cable, so you can position it away from the 1x slot and avoid clearance issues with adjacent components.
How do I confirm the VER009S riser is delivering power to my GPU after installation?
The card has a power LED and a work LED; both should light when the SATA power cable is connected and the system is on, confirming stable 6-pin delivery.
Does the package include the SATA-to-6-pin cable or must I buy it separately?
The box contains the PCI-E 16X card, the PCI-E 1X card, a 100 cm USB 3.0 cable, and the SATA 15-pin to 6-pin power cable — no extra purchase is needed.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



