Rust-Oleum
Rust-Oleum 253479 Gray Concrete Patching Compound Kit
A three-component epoxy patching kit for concrete repairs covering 0.15 cu ft with low VOC content
- TypeTraffic & Parking Lot
- Gray finish blends with existing concrete
- Three-component epoxy system creates durable patches
- Covers 0.15 cubic feet per kit
- Applies in temperatures from 45 to 90 degrees F
- Low VOC formula under 5 grams per liter
Concrete Patching Kit for Small Repairs
The Rust-Oleum 253479 kit supplies a three-component epoxy system in a pail for patching concrete surfaces. It contains a 27.5 fl oz base, a 4 fl oz activator and 13.1 lb of aggregate to yield 0.15 cu ft of coverage. The light gray compound is rated for traffic and parking lot use.
Suitable for Interior and Exterior Concrete Patches
This product fits projects that need a durable, low-VOC repair material applied between 45 and 90 Degrees F. It is not intended for buyers who need a single-part material, a faster full cure than 2 days, or larger volume coverage than the kit provides.
Two-Day Cure with Low VOC Emissions
After mixing, the compound starts to harden in 2.5 hours and reaches full cure in 2 days. VOC content is less than 5g/L and the flash point ranges from 185 to 210 Degrees F. The formulation contains chemicals known to the State of California to cause cancer and reproductive harm.
Highlights
- Gray finish blends with existing concrete
- Three-component epoxy system creates durable patches
- Covers 0.15 cubic feet per kit
- Applies in temperatures from 45 to 90 degrees F
- Low VOC formula under 5 grams per liter
Specifications
| Brand | RUSTOLEUM CONSUMER BRAN |
|---|---|
| Type | Traffic & Parking Lot |
Questions about this item
What surface must already be in place before I apply this patching compound?
The compound is made for concrete surfaces, so a sound concrete substrate must exist before you start the repair.
Can I use this kit when the temperature drops below 45 degrees or rises above 90 degrees F?
No, the application temperature range is 45 to 90 degrees F, so work outside that window is not recommended.
How do I know the patch has finished curing?
The material starts to harden after 2.5 hours and reaches full cure in 2 days.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



