RUNCO
RUNCO VX-2C RUPA 006100 275W 2000H projector lamp
A ready-to-install 275 W UHP lamp module rated for 2 000 hours of projection time
- TypeProjector Lamp
- Wattage275W
- Lamp Life2,000 Hrs.
- Ready to install with pre-assembled bulb and housing
- 275W UHP lamp matches original projector specification
- 2000 hours rated lamp life for extended use
- Built to ISO 9001 quality standards for reliability
- Genuine OEM bulb from Philips Osram Ushio Phoenix Iwasaki Matsushita
Runco VX-2C 275W replacement lamp
The Runco VX-2C RUPA 006100 is a new 275W projector lamp module supplied as a complete bulb-and-housing assembly. It is designed for owners of compatible Runco projectors who need a drop-in replacement when the original lamp reaches end of life. The unit arrives fully assembled so no separate bulb handling or alignment is required during installation.
Thermal output and power draw
The lamp operates at 275W, so the projector’s cooling system will manage the corresponding heat load during normal operation. Acoustic performance depends on the host projector’s fan profile rather than the lamp itself. Power consumption matches the original specification, leaving the projector’s existing power supply unchanged.
Upgrade context and limits
This lamp restores the projector to its factory-rated 2,000-hour service interval, replacing a dimmed or failed original module. It does not increase brightness, resolution or colour gamut beyond the projector’s native capability. Buyers who need longer rated life, higher lumen output or a different wattage should verify whether their projector supports alternative lamp types before ordering.
Highlights
- Ready to install with pre-assembled bulb and housing
- 275W UHP lamp matches original projector specification
- 2000 hours rated lamp life for extended use
- Built to ISO 9001 quality standards for reliability
- Genuine OEM bulb from Philips Osram Ushio Phoenix Iwasaki Matsushita
Specifications
| Brand | Runco |
|---|---|
| Type | Projector Lamp |
| Wattage | 275W |
| Lamp Life | 2,000 Hrs. |
Questions about this item
How do I install the RUNCO VX-2C RUPA 006100 lamp module, and what step do people often miss?
The module arrives as a fully assembled 275W bulb and housing. Power off and unplug the projector, let it cool, then swap the old module. The step often missed is resetting the lamp-hour counter in the projector menu after installation so the 2,000-hour rating tracks correctly.
What maintenance or replacement will the RUNCO VX-2C RUPA 006100 need later?
The UHP 275W bulb is rated for 2,000 hours of use. After that period the lamp should be replaced with a new module. No separate filter or consumable is mentioned for this lamp; the whole housing is swapped at end of life.
What limit appears first when the RUNCO VX-2C RUPA 006100 runs continuously?
The 2,000-hour rated lamp life is the primary limit. Extended continuous operation at 275W will reach that hour threshold before any other specified constraint, at which point brightness and ignition reliability decline and a replacement module is required.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
CHIEF MANUFACTURING CMS018 18" 457 mm Fixed Extension Column projector accessory
- Extension Column
- Projector



