We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Projector lamp module in black housing with 250W bulb installed

RUNCO

RUNCO 151-1025-00 projector lamp 250W 2000 hrs

SKU CH-9HJS-VFY1C

Replacement projector lamp module with 250W bulb rated for 2000 hours, supplied pre-assembled for direct installation

  • TypeProject Lamp
  • Wattage250W
  • Lamp Life2,000 Hrs.
  • Ready-to-install module with 250W NSH bulb and housing included
  • 2,000-hour rated lamp life supports extended viewing sessions
  • Manufactured to ISO 9001 quality standards for reliable performance
  • OEM-compatible replacement matches original Runco 151-1025-00 specifications
  • New Ushio bulb ensures consistent brightness and colour accuracy

Ready-to-install replacement lamp

This Runco 151-1025-00 module ships as a complete 250W bulb and housing assembly so you can swap it straight into a compatible Runco projector. The lamp is new and manufactured to ISO9001 quality checks covering beam performance ignition voltage and run-time.

Build and mounting

The pre-assembled housing eliminates the need to handle a bare bulb or align separate components during installation. A secure connector interface matches the original socket ensuring reliable electrical contact and stable mechanical fit day to day.

2000-hour rated life

The NSH 250W bulb is rated for 2000 hours of operation before brightness drops to half its initial output. Buyers who need longer intervals between replacements should look for a higher-hour module because this lamp does not exceed the 2000-hour specification.

Highlights

  • Ready-to-install module with 250W NSH bulb and housing included
  • 2,000-hour rated lamp life supports extended viewing sessions
  • Manufactured to ISO 9001 quality standards for reliable performance
  • OEM-compatible replacement matches original Runco 151-1025-00 specifications
  • New Ushio bulb ensures consistent brightness and colour accuracy

Specifications

BrandRunco
TypeProject Lamp
Wattage250W
Lamp Life2,000 Hrs.

Questions about this item

Does the 250W lamp draw that full wattage the whole time it runs?

The lamp is rated at 250W, so the projector's power supply will provide that wattage during normal operation.

Will the 151-1025-00 housing fit the same mounting points as the original module?

Yes, the module is a fully assembled bulb and housing built to match the original Runco 151-1025-00 dimensions and mounting points.

What is the correct way to seat the lamp module so the projector recognises it?

Slide the module in until it clicks firmly into the connector, then tighten any retaining screws before closing the lamp door; the most common mistake is leaving the module slightly loose so the interlock switch stays open.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.