We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Cylindrical 12V submersible pump with barbed ports and 13 ft cord

Rule

Rule IL200 Plus In-Line Submersible Pump 2.8gpm 12V

SKU CH-5QRX-KHH8B

Submersible pump delivers 2.8 gpm at 12 V DC with a 13 ft cord and barbed 1/2 in connections

  • TypeMARINE PLUMBING SYSTEMS
  • Delivers 2.8 gallons per minute for efficient water transfer
  • 12-volt DC operation suits standard marine electrical systems
  • 13-foot power cord allows flexible installation positioning
  • 32-foot maximum head handles typical bilge and deck-wash duties
  • 5-amp draw keeps battery consumption moderate

Marine Utility Pump for Potable Systems

The Rule IL200 Plus is a 12V DC in-line submersible pump designed for marine plumbing applications. It handles water and diesel at a maximum flow rate of 3 gpm with a shut-off head of 32 ft. The unit operates at 4.5 A and includes a 13 ft cord with clamp connections for straightforward installation.

2.8 gpm Nominal Flow at 12 Volts

This pump delivers a nominal 2.8 gpm from a 3/100 hp motor while drawing 4.5 A from a 12V DC supply. Maximum discharge pressure reaches 7 psi and the media temperature limit is 176 Degrees F. Both intake and discharge ports use 1/2 in barbed fittings for compatible hose connections.

Suits Bilge Transfer and Fresh-Water Circulation

Boat owners needing a compact pump for potable water systems or diesel transfer will find the flow and pressure adequate. Installations requiring higher head, greater flow, or a different voltage should consider alternative models. The 13 ft power lead may limit placement on larger vessels without extension.

Highlights

  • Delivers 2.8 gallons per minute for efficient water transfer
  • 12-volt DC operation suits standard marine electrical systems
  • 13-foot power cord allows flexible installation positioning
  • 32-foot maximum head handles typical bilge and deck-wash duties
  • 5-amp draw keeps battery consumption moderate

Specifications

BrandRULE
TypeMARINE PLUMBING SYSTEMS

Questions about this item

What does the 2.8 gpm rating mean once the pump is installed in a boat?

It delivers up to 2.8 gallons per minute of water or diesel through a 1/2 in barbed hose at 12 V DC, drawing 4.5 A.

What does the 12 V DC electrical connection with clamps cap in practice?

It limits the pump to 12 V DC systems and 4.5 A draw, so it must be wired to a fused 12 V supply with clamp terminals.

What size hose and clearance does the pump need to fit?

It requires 1/2 in barbed hose on both intake and discharge, a 13 ft power cord, and enough space to mount the in-line body below the 8 ft shut-off level.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.