We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White cylindrical submersible pump with barbed fittings and clamp leads

Rule

Rule IL200 In-Line Submersible Pump Kit 12V 2.8 GPM

SKU CH-3BG0-T8D51

12 V in-line submersible pump kit delivers 2.8 GPM flow with 25 ft head for potable water systems

  • TypeSee Details
  • Delivers up to 2.8 GPM flow for fast water transfer
  • 12 V DC operation runs from standard marine batteries
  • 25 ft maximum head lifts water to elevated outlets
  • 176 °F media temperature rating handles warm water applications
  • 3/8 in barbed connections fit common marine hose sizes

Marine utility pump kit

The Rule IL200 is a 12 V DC in-line submersible pump kit rated at 2.8 A and 3/100 hp. It delivers a maximum flow of 3 gpm and develops up to 25 ft of head with a shut-off level of 8 ft. Both intake and discharge use 3/8 in barbed connections and the kit includes a 9 ft hose with clamp-type electrical leads.

Suited for potable-water transfer

This pump is approved for potable-water systems and handles media temperatures up to 176 °F, making it suitable for freshwater supply, live-well circulation or general bilge duties on small craft. It is not intended for high-pressure wash-down, firefighting or continuous duty cycles that exceed the 7 psi maximum discharge pressure.

Capacity and headroom

At 3 gpm the unit comfortably fills small tanks, feeds deck showers or circulates live wells within the 25 ft head limit. Beyond that head or above the 7 psi pressure ceiling flow drops sharply and the motor can overheat, so installations requiring greater lift or sustained pressure should consider a higher-capacity pump.

Highlights

  • Delivers up to 2.8 GPM flow for fast water transfer
  • 12 V DC operation runs from standard marine batteries
  • 25 ft maximum head lifts water to elevated outlets
  • 176 °F media temperature rating handles warm water applications
  • 3/8 in barbed connections fit common marine hose sizes

Specifications

BrandRULE
TypeSee Details

Questions about this item

What power source does the 12V pump require?

The pump runs on a 12V DC supply and draws 2.8 A during operation.

Can the 3/8 in barbed connections fit the hose I already use?

Both intake and discharge accept 3/8 in barbed hose, so existing 3/8 in hose will connect directly.

How do I confirm the pump is delivering its rated flow after installation?

With the system pressurised to 7 psi, the pump should move up to 3 gpm and reach a 25 ft head.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.