Rule
Rule A53S24-GRA 110W Sump Pump 115VAC
Submersible 110 W sump pump delivers 30 gpm at 5 ft head with 15 ft max lift and 24 ft cord
- TypeDrain Components
- Pumps 30 gallons per minute at 5 feet of head
- Reaches a maximum head of 15 feet for versatile drainage
- Built-in thermal protection prevents motor overheating during continuous use
- Submersible design with 24-foot power cord for flexible placement
- UL listed for safety compliance in residential and commercial applications
Submersible Sump Pump 115 VAC
The Rule A53S24-GRA is a submersible sump pump rated for 115 VAC and 110 W continuous duty. It delivers a flow rate of 30 gpm at 5 ft of head with a maximum head of 15 ft. The pump body is constructed from Valox with a nylon impeller and Buna-N PTFE shaft seal for corrosion resistance.
Automatic Sensor Switch
An integrated sensor switch provides automatic actuation without a separate float mechanism, simplifying installation in tight sump basins. The 24 ft power cord reaches distant outlets without extension leads. Thermal protection shuts the motor down if liquid temperature exceeds 104 °F.
1-1/8 in Discharge Outlet
The discharge fitting accepts 1-1/8 in, 3/4 in, or 1 in hose or pipe, so verify your plumbing matches one of these sizes before purchase. Buyers needing higher head pressure or greater flow capacity should look for a pump with a larger motor rating.
Highlights
- Pumps 30 gallons per minute at 5 feet of head
- Reaches a maximum head of 15 feet for versatile drainage
- Built-in thermal protection prevents motor overheating during continuous use
- Submersible design with 24-foot power cord for flexible placement
- UL listed for safety compliance in residential and commercial applications
Specifications
| Type | Drain Components |
|---|---|
| Brand | Rule |
| Model | A53S24-GRA |
Questions about this item
What size discharge fitting does the Rule A53S24-GRA pump accept?
The pump has a 1 1/8 in discharge outlet with 3/4 in and 1 in adapters included for flexible hose or pipe connections.
How is the 24 ft power cord connected and what voltage is required?
The 24 ft cord plugs into a standard 120 V AC 60 Hz outlet; the pump draws 1 A and includes built-in thermal protection.
Which wear parts will need replacement on the Rule A53S24-GRA over time?
The Buna-N and PTFE shaft seal and the nylon impeller are the primary components that wear and may require periodic replacement.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Taylor 70204 Acrylic Coated Polyester Gray Hot Shot BoatGuard Boat Cover
- Transparent
BoatBuckle F12071 Kwik-Lok Gunwale Tie-Down Stainless Steel
- Transparent



