We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white cylindrical 12V bilge pump with stainless shaft and built-in thermal protection

Rule

Rule 800 GPH 12V bilge pump marine electronic

SKU CH-XVT9-Z2WVP

Non-automatic 12 V bilge pump moves 800 gallons per hour, includes check valve and thermal protection

  • Moves 800 gallons per hour for fast dewatering
  • 12 V DC power suits standard marine electrical systems
  • Submersible and ignition-protected for safe below-waterline operation
  • Stainless-steel shaft resists corrosion in saltwater environments
  • Built-in thermal cell protects pump and vessel from overheating

Rule 800 GPH 12V bilge pump marine electronic

The Rule 800 GPH 12V bilge pump is a submersible marine electronic device designed for standard water removal. It operates on an impeller resistance principle and requires a separate panel switch or float switch for activation. The unit is ignition protected and includes a stainless-steel shaft for corrosion resistance. It suits boat owners needing a non-automatic pump for bilge management.

Thermals noise and power draw

A built-in thermal cell protects the pump and vessel from overheating during extended operation. The high-efficiency, low-amp motor draws minimal current from the 12V DC supply while delivering the rated flow. True electromagnetic suppression reduces electrical interference with other onboard electronics. The pump runs quietly thanks to its submerged operation and efficient motor design.

Build quality connectors and mounting

The stainless-steel shaft and ignition-protected construction ensure durability in harsh marine environments. A hidden air vent prevents airlocking to maintain consistent priming. An included backflow preventer acts as a check valve to stop water returning through the discharge. The non-automatic design means wiring connects to an external switch rather than an internal float mechanism.

Highlights

  • Moves 800 gallons per hour for fast dewatering
  • 12 V DC power suits standard marine electrical systems
  • Submersible and ignition-protected for safe below-waterline operation
  • Stainless-steel shaft resists corrosion in saltwater environments
  • Built-in thermal cell protects pump and vessel from overheating

Specifications

BrandRULE

Questions about this item

How do I wire the Rule 800 GPH 12V bilge pump to a panel or float switch for non-automatic operation?

Connect the pump's two leads to a 12V DC panel switch or Rule float switch; the built-in check valve and hidden air vent prevent backflow and airlocking during installation.

What maintenance does the stainless-steel shaft and impeller need over time?

Inspect the stainless-steel shaft and impeller for debris or corrosion each season; clean the intake and check the backflow preventer to maintain the 800 GPH flow rate.

At what point does the built-in thermal cell shut the pump down during continuous running?

The thermal cell cuts power when the motor overheats, protecting the pump and vessel; it resets automatically once the unit cools after sustained high-load use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.