We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 20cm cable with 4-pin Molex male plug to 15-pin SATA female socket

RUITEXUN IDE4P-SATA15P Molex 4-Pin Male to SATA 15-Pin Female Power Adapter Cable 20cm

SKU CH-J7MC-0PN1M

Converts a Molex 4-pin plug into a SATA 15-pin power connector for drives, 20 cm long

  • TypeSATA
  • ColorBlack
  • Connector Detail4 Pin
  • Terminal GenderMale-to-Female
  • ConductorCopper
  • FeaturesHigh Speed
  • Converts legacy Molex power to SATA 15-pin for modern drives
  • 20 cm length fits tight chassis routing without excess cable clutter
  • Copper conductors deliver reliable power to HDDs, SSDs and optical drives
  • Plug-and-play adapter requires no drivers or configuration to operate
  • Male 4-pin Molex to female 15-pin SATA updates older PSUs for new devices

Molex-to-SATA power adapter for legacy PSUs

This 20 cm cable converts a Molex 4-pin male connector into a SATA 15-pin female connector, letting older power supplies drive modern SATA hard drives, solid-state drives and optical drives. Copper conductors carry the required power lines and the black jacket keeps the short run tidy inside the case. Plug-and-play installation needs no tools or drivers.

Suits builders reusing an older PSU.

Anyone upgrading storage on a system that only offers Molex power plugs will find this adapter a direct solution. It does not help if the power supply already provides native SATA connectors or if the device requires a Molex plug instead of a SATA receptacle.

The 15-pin SATA female connector decides fit

The single specification that determines compatibility is the 15-pin SATA power receptacle on the drive or device. If the target hardware uses that exact connector, the adapter will mate correctly; otherwise a different cable is required.

Highlights

  • Converts legacy Molex power to SATA 15-pin for modern drives
  • 20 cm length fits tight chassis routing without excess cable clutter
  • Copper conductors deliver reliable power to HDDs, SSDs and optical drives
  • Plug-and-play adapter requires no drivers or configuration to operate
  • Male 4-pin Molex to female 15-pin SATA updates older PSUs for new devices

Specifications

BrandRUITEXUN
ModelIDE4P-SATA15P
TypeSATA
ColorBlack
Connector Detail4 Pin
Terminal GenderMale-to-Female
ConductorCopper
FeaturesHigh Speed

Questions about this item

How can I confirm the adapter is delivering power to my SATA drive after connecting it?

The drive should spin up and appear in the BIOS or operating system once the Molex 4-pin male end is plugged into the PSU and the 15-pin SATA female end into the drive.

What comes in the package and do I need any extra cables or tools?

The box contains one 20cm Molex IDE 4-pin male to 15-pin SATA female adapter cable; no additional cables or tools are required for installation.

Which version of this adapter should I choose for a standard SATA hard drive or SSD?

The single listed model IDE4P-SATA15P with a 15-pin SATA female connector is the correct version for powering standard SATA HDDs and SSDs from a Molex 4-pin PSU output.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.