SonicWall
SonicWall 01-SSC-1445 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$378.99
0.00452893BTC
In stock
RUCKUS WIRELESS
RUCKUS WIRELESS ICX8200-C08PF network switch 8x10/100/1000 PoE+ 2x10G SFP+ 124W
A compact managed switch with eight Gigabit PoE+ ports, two 10 GbE SFP+ uplinks and a 124 W power budget for Wi-Fi 6 access points
- FormatDesktop
- Standards802.1AB LLDP/ LLDP-MED 802.1D MAC Bridging 802.1p Mapping to
- Network Management TypeManaged
- Management FeatureDHCP Auto-Configuration Configuration Logging Digital Optica
- MAC Address Table32K
- Jumbo Frames9,216 bytes
- 8 PoE+ ports power Wi-Fi 6 access points and IoT devices
- 124 W PoE budget supports multiple high-power endpoints simultaneously
- 2×10 GbE SFP+ uplinks provide high-speed stacking and aggregation
- Layer 3 routing with static, RIP and ECMP enables flexible network design
- Managed switch with CLI, web GUI and DHCP auto-configuration for simple deployment
Eight PoE+ ports and dual 10G SFP+ uplinks
The RUCKUS ICX 8200 compact switch provides eight 10/100/1000 Mbps ports with PoE+ support and a 124 W power budget. Two 10 GbE SFP+ ports handle stacking or uplink duties. The desktop form factor runs on 100 to 240 VAC and operates between 0 °C and 45 °C. Layer 3 routing includes static routes, RIP and ECMP.
Suits Wi-Fi 6 access-point deployments and IoT edges
This switch fits networks that need to power Wi-Fi 6 access points and PoE devices from a single compact unit. Buyers who require more than eight copper ports or a higher PoE budget should look at larger models. The 150 W maximum power draw and included three-year remote TAC support simplify planning.
124 W PoE budget decides port density
The 124 W PoE budget is the single figure that determines how many Class 4 devices you can run simultaneously. Eight ports share this budget, so each connected access point or camera reduces the headroom for the next one. Check the per-device draw before committing to a full eight-port load.
Highlights
- 8 PoE+ ports power Wi-Fi 6 access points and IoT devices
- 124 W PoE budget supports multiple high-power endpoints simultaneously
- 2×10 GbE SFP+ uplinks provide high-speed stacking and aggregation
- Layer 3 routing with static, RIP and ECMP enables flexible network design
- Managed switch with CLI, web GUI and DHCP auto-configuration for simple deployment
Specifications
| Brand | Ruckus Wireless |
|---|---|
| Series | RUCKUS ICX 8200 |
| Part Number | ICX8200-C08PF |
| Format | Desktop |
| Standards | 802.1AB LLDP/ LLDP-MED 802.1D MAC Bridging 802.1p Mapping to Priority Queue 802.1s Multiple Spanning Tree (MST) 802.1w Rapid Reconfiguration of Spanning Tree (RSTP) 802.1x Port-based Network Access Control (PNAC) 802.3 Carrier Sense Multiple Access/Collision Detection (CSMA/CD) 802.3ab 1000BASE-T 802.3 10Base-T 802.3ad Link Aggregation (Dynamic and Static) 802.1 AX-2008 Link Aggregation 802.3ae 10 Gigabit Ethernet 802.3af Power over Ethernet 802.3at Power over Ethernet Plus 802.3bz Multigigabit Ethernet 802.3u 100Base-TX 802.3x Flow Control 802.3z 1000Base-SX/LX 802.3 MAU MIB (RFC 22 |
| Network Management Type | Managed |
| Management Feature | DHCP Auto-Configuration Configuration Logging Digital Optical Monitoring Display Log Messages on Multiple Terminals Embedded Web Management (HTTP/HTTPS) Embedded DHCP Server Industry-standard Command Line Interface (CLI) RUCKUS SmartZone, RUCKUS One, RUCKUS Unleashed* CLI activation of optional software features USB file management and storage Macro for batch execution Out-of-band Ethernet Management RSPAN TFTP TELNET Client and Server SSH / SSH V2 Bootp SNMPv1/v2c DHCP Server and DHCP Relay SNMPv3 Intro to Framework Architecture for Describing SNMP Framework SNMP Message Processing |
| MAC Address Table | 32K |
| Jumbo Frames | 9,216 bytes |
| Buffer Memory | 4 MB |
| Security | 802.1X authentication MAC authentication Flexible authentication Web authentication DHCP snooping Dynamic ARP inspection Neighbor Discovery (ND) Inspection Bi-level Access Mode (Standard and EXEC Level) EAP pass-through support IEEE 802.1X username export in sFlow Protection against Denial of Service (DoS) attacks Authentication, Authorization, and Accounting (AAA) MAC Address Locking MAC Port Security Advanced Encryption Standard (AES) with SSHv2 RADIUS/TACACS/TACACS+ Secure Copy (SCP) Secure Shell (SSHv2) Protected Ports Local Username/Password Change of Authorization (CoA) RFC 517 |
| QoS | QoS priority queues: 8 per port Quality of Service (QoS): ACL Mapping and Marking of ToS/DSCP (CoS) ACL Mapping and Marking of 802.1p ACL Mapping to Priority Queue Classifying and Limiting Flows Based on TCP Flags DiffServ Support Honoring DSCP and 802.1p (CoS) MAC Address Mapping to Priority Queue Priority Queue Management using Weighted Round Robin (WRR), Strict Priority (SP), and a combination of WRR and SP |
| Layer | 3 |
| Layer 2 Features | 802.1s Multiple Spanning Tree 802.1x Authentication Auto MDI/MDIX BPDU Guard, Root Guard Dual-Mode VLANs MAC-based VLANs, Dynamic MAC-based VLAN activation Dynamic VLAN Assignment Dynamic Voice VLAN Assignment Fast Port Span GVRP : GARP VLAN Registration Protocol IGMP Snooping (v1/v2/v3) IGMP Proxy for Static Groups IGMP v2/v3 Fast Leave Inter-Packet Gap (IPG) adjustment Link Fault Signaling (LFS) MAC Address Filtering MAC Learning Disable MLD Snooping (v1/v2) Multi-device Authentication Per-VLAN Spanning Tree (PVST/PVST+/PRST) Mirroring: Port-based, ACL-based, MAC Filter-based, and |
| Layer 3 Features | Base Layer 3 IP routing feature set: IPv4 and IPv6 static routes RIP v1/v2, RIPng ECMP Port-based Access Control Lists Layer 3/Layer 4 ACLs Host routes Virtual Interfaces Routed Interfaces Route-only Support Routing Between Directly Connected Subnets Premium Layer 3 IP routing feature set with software license: IPv4 and IPv6 dynamic routes OSPF v2, v3 PIM-SM, PIM-SSM, PIM-DM, PIM passive (IPv4, IPv6) PBR Virtual Route Redundancy Protocol VRRP (IPv4) VRRP v3 (IPv6) VRRP-E(IPv4/IPv6) VRF (IPv4 and IPv6 GR |
| Max Power Consumption | Power / Device Type: Power Supply Max Power Consumption: 150 Watt Power / Voltage Required: 100 to 240 VAC, 50 to 60 Hz |
| Temperature | Min Operating Temperature: 0 C Max Operating Temperature: 45 C Min Storage Temperature: -40 F Max Storage Temperature: 158 F |
| Shipping weight | 2.27 kg |
| Package size | 270 × 214 × 44 mm |
Questions about this item
How much heat does the ICX8200-C08PF generate when its 150 W power supply runs continuously?
The switch draws up to 150 W and operates between 0 °C and 45 °C, so sustained use stays within that thermal envelope without extra cooling.
Which cables and modules must I supply to use the eight PoE+ ports and two 10 GbE SFP+ uplinks?
Provide Cat5e or better copper for the eight RJ-45 PoE+ ports and insert compatible SFP+ transceivers with fibre or DAC cables for the two 10 GbE uplink ports.
Will the ICX8200-C08PF interoperate with my existing 1 GbE access points and older switches?
Yes — the eight RJ-45 ports negotiate 10/100/1000 Mbps and the SFP+ uplinks accept 1 GbE or 10 GbE modules, so legacy gear connects directly.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
SonicWall
SonicWall 01-SSC-1435 Capture Advanced Threat Protection hardware license
- Capture Advance Thr…
$357.99
0.00427798BTC
In stock
