We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black aluminium-alloy mini DI pedal, 93 x 42 x 52 mm, 1/4 in and XLR jacks, true-bypass footswitch

rowin

Rowin LEF-331 Passive DI Box Guitar Pedal

SKU CH-C3H6-3KKN1

Passive DI pedal with cabinet simulator, ground lift and true bypass in a compact aluminium enclosure

  • TypeDI BOX PEDAL
  • Accessory TypeEffects Pedals - TRELICOPTER
  • FinishFull Metal Case
  • Body StyleMini Size
  • Body MaterialsMetal
  • Back & SideMetal
  • Ultra-low distortion preserves your tone with balanced XLR output
  • Cabinet simulator shapes amp-like sound directly from the pedal
  • Ground-lift switch removes hum without extra cables
  • Full-metal mini chassis fits any pedalboard at 93 x 42 x 52 mm
  • True bypass keeps signal pure when the effect is off

Mini DI Box for Stage and Studio

The Rowin LEF-331 is a passive direct box built for guitarists and bassists who need a compact way to send an instrument signal to a mixing desk or audio interface. Its 1M Ohm input matches high-impedance pickups while the balanced XLR output drives long cable runs without noise. A cabinet simulator and ground-lift switch are built in for tonal shaping and hum reduction.

Consistent Signal Over Long Runs

Because the circuit is passive, the unit adds no active gain stage that could saturate or hiss when the show runs long. The 100k Ohm output impedance and 470 Ohm secondary output keep the signal stable whether you are feeding a front-of-house snake or a studio preamp. True bypass ensures the pedal disappears from the chain when disengaged.

Check Your Power and Connections

The pedal requires a 9V DC centre-negative supply capable of at least 40mA; the adapter is not included. Verify you have a spare 1/4 inch jack for the instrument input and either an XLR cable or a second 1/4 inch lead for the output. The aluminium enclosure measures 93 x 42 x 52mm, so confirm pedalboard space before ordering.

Highlights

  • Ultra-low distortion preserves your tone with balanced XLR output
  • Cabinet simulator shapes amp-like sound directly from the pedal
  • Ground-lift switch removes hum without extra cables
  • Full-metal mini chassis fits any pedalboard at 93 x 42 x 52 mm
  • True bypass keeps signal pure when the effect is off

Specifications

BrandROWIN
SeriesGUITAR EFFECT PEDAL
ModelROWIN LEF-331 DI BOX
Part NumberLEF331
TypeDI BOX PEDAL
Accessory TypeEffects Pedals - TRELICOPTER
FinishFull Metal Case
Body StyleMini Size
Body MaterialsMetal
Back & SideMetal
TopMetal
Neck MaterialsMetal
Fretboard MaterialsPCB Board
Output Power26mA
Inputs1m Ohms
Outputs100k Ohms
Power SupplyDC 9V Negative Center
SpecificationGUITAR EFFECT PEDAL
FeatureANALOG EFFECT PEDAL
Dimension12/6/5cm (with box)
Weight0.22kg
Package ContainsDI BOX Pedal / User Manual / Box

Questions about this item

Does the LEF-331 generate noticeable heat or noise when left on for a full rehearsal?

The passive circuit draws only 40 mA from a 9 V supply, so it stays cool and adds no audible noise during extended use.

What extra gear do I need before the LEF-331 will operate?

You must provide a 9 V DC centre-negative adapter; the pedal ships without one.

Will the LEF-331 work cleanly with my vintage amp that only has a high-impedance input?

Yes — the 1 MΩ input matches classic guitar pickups, and the 470 Ω output feeds older gear without signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.