Knox Gear KN-GC02 39" Hard Shell Guitar Case Gold Hardware
- Guitar Bag
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
rowin
An analog overdrive pedal with boost and normal modes, true bypass, and a full-metal mini chassis drawing 40 mA at 9 V DC
The Rowin LEF-328 Tube Pusher is an analog overdrive pedal built for guitarists who want classic tube-style saturation in a mini metal enclosure. It delivers ultra-wide dynamic range through two distinct working modes. BOOST mode raises the bottom end and adds a slight high-mid peak around 3.5KHz as drive increases. NORMAL mode colours the original signal very little, making it suitable for clean boosting.
The pedal draws 40 mA from a standard DC 9V negative-centre adapter and presents a 1M Ohm input impedance with a 470 Ohm output impedance. True bypass switching removes the circuit entirely from the signal chain when disengaged, preserving core tone. The full metal shell provides shielding and durability for stage or studio use without adding noise or power overhead.
Measuring 93.5 mm deep by 42 mm wide by 52 mm high and weighing 300 g, the unit fits into crowded board layouts where larger drives cannot. The 1/4 inch monaural input and output jacks use standard spacing for simple patch-cable routing. Builders who need multiple gain stages or stereo routing will need additional pedals, as this model provides a single mono channel only.
| Brand | ROWIN |
|---|---|
| Series | GUITAR EFFECT PEDAL |
| Model | ROWIN LEF-328 TUBE PUSHER |
| Part Number | LEF328 |
| Type | TUBE PUSHER PEDAL |
| Accessory Type | Effects Pedals - TUBE PUSHER |
| Finish | Full Metal Case |
| Body Style | Mini Size |
| Body Materials | Metal |
| Back & Side | Metal |
| Top | Metal |
| Neck Materials | Metal |
| Fretboard Materials | PCB Board |
| Output Power | 26mA |
| Inputs | 1m Ohms |
| Outputs | 100k Ohms |
| Power Supply | DC 9V Negative Center |
| Specification | GUITAR EFFECT PEDAL |
| Feature | ANALOG EFFECT PEDAL |
| Dimension | 12/6/5cm (with box) |
| Weight | 0.22kg |
| Package Contains | TUBE PUSHER Pedal / User Manual / Box |
Plug your guitar into the 1/4″ input jack and your amp into the 1/4″ output jack. Use a standard 9 V DC centre-negative adapter supplying at least 40 mA; the pedal has no battery compartment.
The 3PDT footswitch handles true-bypass switching; its mechanical contacts wear before the analogue circuit. Keep a spare switch handy for a quick solder swap.
In BOOST mode the drive knob adds gain centred around 3.5 kHz; past roughly three-quarters rotation the low-end boost saturates and dynamic headroom drops noticeably.
Also in this aisle
Same shelf, same checkout — eight coins and a 30-minute rate lock.
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
Pick the language the site speaks to you in.
No language matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?