We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact metal noise gate pedal with hard and soft modes

rowin

Rowin LEF-319 Noise Gate Pedal Hard Soft 2 Modes True Bypass

SKU CH-ZQ5R-JZGFH

Compact noise gate pedal with adjustable reduction from -70 to +10 dB, Hard and Soft modes, true bypass, and a full metal mini enclosure

  • TypeNOISE GATE PEDAL
  • Accessory TypeEffects Pedals - Noise Gate
  • FinishFull Metal Case
  • Body StyleMini Size
  • Body MaterialsMetal
  • Back & SideMetal
  • Reduces unwanted noise while preserving original tone
  • Adjustable suppression from -70 to +10 dB
  • Hard and Soft modes suit different playing styles
  • Zinc-alloy metal case withstands heavy use
  • True bypass keeps signal transparent with LED status

What this pedal does

The Rowin LEF-319 is a noise gate pedal built for electric guitar players who want to remove unwanted hum and hiss from their signal chain. It uses an analog circuit to suppress noise while preserving the original tone. The unit offers two operating modes: Hard for strong noise reduction and Soft for subtle gating. Its true bypass switching ensures the signal passes through unaffected when the pedal is off.

Power and signal specs

The pedal runs on a standard DC 9 V supply with a negative centre pin and draws 26 mA while operating. Input impedance is rated at 1 M Ohm and output impedance at 100 k Ohm, matching typical guitar and amplifier connections. The metal enclosure shields the circuit from external interference. No battery compartment is mentioned in the supplied data.

Deciding specification

The adjustable noise reduction range spans from -70 dB to +10 dB, which determines how deeply the gate can cut unwanted signal. Buyers who need a wider or narrower threshold window should check this figure against their specific noise floor requirements.

Highlights

  • Reduces unwanted noise while preserving original tone
  • Adjustable suppression from -70 to +10 dB
  • Hard and Soft modes suit different playing styles
  • Zinc-alloy metal case withstands heavy use
  • True bypass keeps signal transparent with LED status

Specifications

BrandROWIN
SeriesGUITAR EFFECT PEDAL
ModelROWIN LEF-319 NOISE GATE
Part NumberLEF319
TypeNOISE GATE PEDAL
Accessory TypeEffects Pedals - Noise Gate
FinishFull Metal Case
Body StyleMini Size
Body MaterialsMetal
Back & SideMetal
TopMetal
Neck MaterialsMetal
Fretboard MaterialsPCB Board
Output Power26mA
Inputs1m Ohms
Outputs100k Ohms
Power SupplyDC 9V Negative Center
SpecificationGUITAR EFFECT PEDAL
FeatureANALOG EFFECT PEDAL
Dimension12/6/5cm (with box)
Weight0.22kg
Package ContainsNoise Gate pedal / User Manual / Box

Questions about this item

How do I power the LEF-319 and which way round does the DC plug go?

Connect a standard 9 V centre-negative supply; the pedal draws 26 mA so any regulated 9 V adaptor rated for at least that current will work

What part will need attention first after extended gigging?

The footswitch and the input/output jacks see the most mechanical stress; keep the jack nuts tight and spray the switch occasionally with contact cleaner

Where does the signal chain hit its ceiling when the gate is working hard?

In Hard mode the circuit clamps noise down to -70 dB, so very low-level detail can be lost if the threshold is set too aggressively

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.