Rolls Corporation
Rolls PS27s 15VDC 200mA Wall Power Adapter
Delivers 15 VDC at 200 mA from any 100-240 VAC outlet with a 6-foot cord and 2.1 x 5.5 mm plug
- Delivers steady 15 VDC 200 mA output for reliable device operation
- Accepts worldwide 100-240 VAC input so it works on any mains supply
- Six-foot cord gives flexible placement away from the wall socket
- 1 × 5.5 mm DC plug fits many common electronics
- Lightweight 2.5-ounce design keeps travel bags light
Compact wall adapter for 15 VDC devices
The Rolls PS27s plugs directly into a 100-240 VAC mains socket and supplies a regulated 15 VDC output rated at 200 mA. It is intended for small electronics that require this specific voltage and current combination.
Low heat and silent operation
The adapter draws only 12 VA from the wall, so it runs cool and produces no audible noise during normal use. A 6 foot cable separates the wall plug from the device connector, allowing flexible placement without adding bulk at the outlet.
2.1 x 5.5 mm barrel connector included
The fixed DC plug matches equipment designed for a 2.1 x 5.5 mm centre-positive barrel jack. No additional cables, tips or software are supplied, so buyers must confirm their device uses this exact connector size and polarity.
Highlights
- Delivers steady 15 VDC 200 mA output for reliable device operation
- Accepts worldwide 100-240 VAC input so it works on any mains supply
- Six-foot cord gives flexible placement away from the wall socket
- 1 × 5.5 mm DC plug fits many common electronics
- Lightweight 2.5-ounce design keeps travel bags light
Specifications
No published specifications for this item yet.
Questions about this item
How do I connect the 2.1 x 5.5 mm DC plug on the 6-foot cord to my device, and what is the common mistake?
Align the centre-positive 2.1 mm pin with the device jack and push straight in until it seats; the common mistake is forcing it at an angle, which bends the pin.
What part of the PS27s will need replacement first under normal use?
The 6-foot output cord and 2.1 x 5.5 mm DC plug endure repeated flexing, so the cable or connector typically fails before the sealed wall adapter.
At what load does the 12 VA input rating become the limiting factor during sustained operation?
Continuous draw at the full 15 VDC 200 mA output (3 W) keeps the adapter well within its 12 VA input capacity, so the thermal limit of the sealed enclosure appears first.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
Black Box Corporation
Black Box Corporation CAT6 EZ-RJ45 Modular Plugs 100-Pack
$95.99
0.00115093BTC
In stock
