We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver broadcast microphone with inline preamp and long XLR cable

RODE Microphone

RODE Procaster Dynamic Vocal Microphone Bundle with Triton Audio Fethead Preamp and 20-Feet XLR Cable

SKU CH-JJM5-108X8

Broadcast-quality dynamic vocal microphone with tight cardioid pattern, internal shock mount and pop filter, bundled with an in-line preamp and 20-feet XLR cable

  • Tight cardioid pattern rejects off-axis noise for clean speech capture
  • Internal shock mounting and pop filter minimise handling noise and plosives
  • Rugged all-metal construction built for broadcast durability
  • Triton Fethead in-line preamp adds clean gain for dynamic mic
  • 20-foot XLR cable and stand mount included for immediate setup

Broadcast vocal microphone kit

The Rode Procaster dynamic microphone is built for speech capture in broadcast radio, voice-over work and podcasts. Its tight cardioid pattern and tailored frequency response focus on the speaker while rejecting off-axis sound. An internal shock mount and pop filter reduce handling noise and plosives. The all-metal body adds durability for daily studio use.

Triton Fethead preamp and 20-foot XLR cable

The bundle adds a Triton Audio Fethead in-line preamp that supplies clean gain to low-output dynamic and ribbon microphones. This lowers the noise floor from the mixer or interface preamp. A 20-foot XLR cable is also included so the microphone can reach the recorder or desk without an extra purchase.

Stand mount and simple connections

A stand mount with a 3/8-inch adaptor and a zip pouch come in the box. The microphone connects to the Fethead with a short XLR run, then the long cable runs to the interface. The Fethead requires phantom power from the mixer or interface to operate. Users without phantom power on their input will not get signal from the preamp.

Highlights

  • Tight cardioid pattern rejects off-axis noise for clean speech capture
  • Internal shock mounting and pop filter minimise handling noise and plosives
  • Rugged all-metal construction built for broadcast durability
  • Triton Fethead in-line preamp adds clean gain for dynamic mic
  • 20-foot XLR cable and stand mount included for immediate setup

Specifications

No published specifications for this item yet.

Questions about this item

Does the Procaster capsule or its internal shock-mount ever need replacement?

The capsule is internally shock-mounted and built into the all-metal body; no user-serviceable parts are listed, so routine replacement is not expected.

What limits the Procaster during long recording sessions?

As a passive dynamic microphone, the Procaster itself has no electronic gain limit; the practical ceiling is the headroom of the Triton Audio FetHead preamp and your interface input.

How much heat or noise does the FetHead add when powered all day?

The FetHead is a phantom-powered in-line preamp with no active cooling; it runs silently and adds negligible heat during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.