Accsoon
Accsoon CineView SE Multi-Spectrum Wireless Video Transmitter 1200ft 1080p HDMI SDI
$181.99
0.00215103BTC
In stock
Rode Lavalier GO Professional Wearable Microphone Black 3.5mm 4.0mm Capsule 1.2m Kevlar Cable
A professional wearable microphone with a discreet 4.0 mm omnidirectional capsule, 3.5 mm TRS connector, 1.2 m Kevlar-reinforced cable, 35 dB sensitivity and 67 dB signal-to-noise ratio.
- ColorBlack
- Connector3.5 mm Jack
- Microphone Sensitivity35 decibels
- Microphone Impedance3000 ohm
- Microphone Signal to Noise Ratio(SNR)67 decibels
- FeaturesClip
- Broadcast-grade audio from a 4.0 mm capsule
- 5 mm TRS plug connects to cameras and wireless transmitters
- Omnidirectional pattern captures clear sound from any angle
- Foam pop shield cuts wind noise and plosives
- 2 m Kevlar-reinforced cable withstands heavy use
Professional wearable microphone for creators
The Rode Lavalier GO is a professional-grade wearable microphone built for filmmaking, broadcast, streaming and video calls. Its omnidirectional polar pattern captures clear audio from every direction and remains forgiving if the clip shifts during fast-paced recording. A 4.0mm capsule keeps the profile ultra-discreet while delivering broadcast-grade sound. The 3.5mm TRS connector provides broad compatibility with cameras, audio interfaces and wireless transmitters.
Sensitivity, noise floor and passive operation
With a sensitivity of 35 decibels and a signal-to-noise ratio of 67 decibels, the microphone produces a clean signal without requiring external power. The 3000 ohm impedance matches standard microphone inputs on a wide range of devices. Because it draws no power and has no active circuitry, the unit adds no electrical noise or heat to the recording chain.
Foam shield, Kevlar cable and mounting clip
A supplied foam pop shield reduces wind noise and vocal plosives such as hard b, t and p sounds. The 1.2m cable is reinforced with Kevlar for durability across repeated shoots. An integrated mounting clip includes built-in cable management for quick rigging and secure placement on talent.
Highlights
- Broadcast-grade audio from a 4.0 mm capsule
- 5 mm TRS plug connects to cameras and wireless transmitters
- Omnidirectional pattern captures clear sound from any angle
- Foam pop shield cuts wind noise and plosives
- 2 m Kevlar-reinforced cable withstands heavy use
Specifications
| Brand | Rode |
|---|---|
| Model | Lavalier GO |
| Part Number | LAVGO |
| Color | Black |
| Connector | 3.5 mm Jack |
| Microphone Sensitivity | 35 decibels |
| Microphone Impedance | 3000 ohm |
| Microphone Signal to Noise Ratio(SNR) | 67 decibels |
| Features | Clip |
Questions about this item
How do I install the Lavalier GO and what step do people often miss?
Connect the 3.5mm TRS plug to a compatible microphone input, clip the 4.0mm capsule near the mouth, and fit the supplied foam pop shield — the step often missed is seating the shield fully over the capsule to block plosives.
What maintenance or replacement will the Lavalier GO need later?
The foam pop shield degrades with moisture and handling; replace it when it loses shape or shows residue. The Kevlar-reinforced 1.2m cable resists wear, but inspect the 3.5mm connector for bent pins after heavy use.
What limit appears first during sustained use of the Lavalier GO?
The 35 dB sensitivity and 67 dB signal-to-noise ratio mean the noise floor becomes audible before the 3000 ohm impedance causes level drop, especially with long, quiet takes on low-gain preamps.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
