We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black 12 ft HDMI cable with gold-plated male connectors on both ends

Rocstorage, Inc

Rocstorage, Inc Y10C162-B1 12 ft HDMI 2.1 cable

SKU CH-6DC9-X1YWF

A 12 ft HDMI 2.1 cable with gold-plated connectors and shielding for 4K at 60 Hz

  • TypeOthers
  • Supports 4K at 60 Hz with 18 Gbps bandwidth
  • 12 ft length gives flexible placement for TV or projector
  • Gold-plated connectors resist corrosion for reliable signal
  • Shielded construction reduces interference on long runs
  • Backwards compatible with earlier HDMI devices

12 ft HDMI 2.0 cable for 4K displays

This 12 ft cable connects computers, consoles and streaming devices to HDTVs and projectors. It carries 4K resolution at 60 Hz with bandwidth up to 18.2 Gbps. Gold-plated connectors and shielding protect signal integrity over the full length. Backwards compatibility ensures it works with older HDMI sources and sinks.

Thermals noise and power draw

As a passive copper cable it generates no heat and produces no audible noise. It draws no external power and adds no load to the host device. The gold-plated contacts maintain low resistance without active cooling. Operation stays silent and thermally neutral in any installation.

Gold plating and shielding benefits

Gold plating on the 19-pin connectors resists corrosion for reliable long-term contact. Integrated shielding blocks electromagnetic interference that can cause dropouts at high bandwidth. These features preserve the 18.2 Gbps link across the 3.6 m run. No software or drivers are required for any supported device.

Highlights

  • Supports 4K at 60 Hz with 18 Gbps bandwidth
  • 12 ft length gives flexible placement for TV or projector
  • Gold-plated connectors resist corrosion for reliable signal
  • Shielded construction reduces interference on long runs
  • Backwards compatible with earlier HDMI devices

Specifications

BrandRocstor
TypeOthers

Questions about this item

How do I install the 12 ft HDMI cable and what step do people often get wrong?

Connect the 19-pin HDMI Male ends to source and display; the common mistake is forcing the connector upside down because the 19-pin keying only fits one orientation.

What maintenance or replacement will this cable need over time?

The gold-plated connectors resist corrosion, so no routine maintenance is required; replace the cable only if the shielding is damaged or the 18.2 Gbps bandwidth drops below 4K 60 Hz needs.

What limit appears first during sustained 4K 60 Hz use?

The 18.2 Gbps bandwidth ceiling is reached at 3840x2160 60 Hz, so longer runs or higher refresh rates would hit that limit before the 12 ft length causes signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.