RockTrix 4pcs 2 inch Skid Steer 8Lug Wheel Spacers 8x8 Bolt Pattern 9/16x18 Studs Nuts

Skid-Steer Wheel Spacers for Track Clearance

This set of four new RockTrix spacers fits skid-steer loaders that run a 8x8 bolt pattern and a 6-inch centre bore. The 2.0-inch thickness pushes each wheel outward so tire chains or over-the-tire tracks can be installed without rubbing the machine frame. Buyers who need a different bolt pattern or a thinner spacer for standard tyre fitment cannot use this kit.

Hub-Centric Aluminium Build with Pressed-In Studs

Each spacer is machined to a 10-inch outer diameter and uses the factory 6-inch hub bore for centric location. Pressed-in 9/16x18 UNF studs and matching lug nuts are supplied, so the wheel fastens to the spacer and the spacer bolts to the hub in a single stack. The design assumes the operator will torque the hardware to the loader manufacturer's specification and re-check after the first hours of tracked operation.

8x8 Bolt Pattern and 9/16x18 Thread Compatibility

The critical fitment gate is the 8x8 bolt circle combined with the 9/16x18 thread pitch; both must match the host machine exactly or the spacers will not mount. The kit also targets 10x16.5 and 12x16.5 tyre sizes, so loaders running other tyre dimensions should verify clearance before fitting.