We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rockford Fosgate Para-Punch Bass remote EQ knob with cable and mounting hardware

Rockford Fosgate

Rockford Fosgate PPB1 Para-Punch Bass Remote EQ

SKU CH-8NB8-5SJ8Z

Wired remote bass knob adds variable 35-70Hz frequency control and 0dB to +18dB boost for compatible amplifiers

  • TypeAccessory
  • FeaturesPara-Punch Bass remote EQ
  • FeaturePara-Punch Bass remote EQ
  • Weight1.43
  • Variable 35-70 Hz frequency lets you target the bass range you want
  • 0 dB to +18 dB boost adds impact without overdriving the amp
  • Remote knob puts level control at your fingertips while driving
  • Includes cable and mounting hardware for a clean, secure install
  • Designed for compatible Rockford Fosgate amplifiers using the specified 8-conductor cable

Para-Punch Bass remote EQ

The Rockford Fosgate PPB1 is a wired remote bass control designed for select Rockford Fosgate amplifiers. It provides a Para-Punch Bass remote EQ function that lets the driver adjust low-frequency response from the front seat. The unit includes the knob, a dedicated 8-conductor non-flipped cable, a mounting clip and mounting screws. It is intended for system owners who want convenient bass-level management without replacing the head unit.

Variable 35-70Hz frequency and 0 to +18dB boost

The accessory adds a variable frequency centre point between 35 and 70 Hz and a continuously adjustable boost range from 0 dB to +18 dB. This allows the listener to tune the bass emphasis to suit different music genres or cabin acoustics on the fly. The included non-flipped cable is required; using a standard flipped RJ-45 telephone cable or the older 6-conductor cable will damage the amplifier and void its warranty. Installation uses the supplied clip and screws for a secure dash or console mount.

8-conductor non-flipped cable requirement

The single specification that decides compatibility is the 8-conductor non-flipped cable interface. Amplifiers built in 2003 or earlier use a 6-conductor non-flipped cable and are not compatible with this remote. Buyers who need a remote for those older amplifiers cannot use the PPB1. The part weighs 1.43 units and is supplied new as a direct replacement wired remote bass knob.

Highlights

  • Variable 35-70 Hz frequency lets you target the bass range you want
  • 0 dB to +18 dB boost adds impact without overdriving the amp
  • Remote knob puts level control at your fingertips while driving
  • Includes cable and mounting hardware for a clean, secure install
  • Designed for compatible Rockford Fosgate amplifiers using the specified 8-conductor cable

Specifications

BrandRockford Fosgate
TypeAccessory
FeaturesPara-Punch Bass remote EQ
FeaturePara-Punch Bass remote EQ
Weight1.43

Questions about this item

Does the included cable need periodic replacement on the PPB1 remote?

The PPB1 uses an 8-conductor non-flipped cable; Rockford Fosgate warns that a standard flipped RJ-45 telephone cable will damage the amplifier, so only the specified cable should be used.

What frequency range limits the bass adjustment on this EQ?

The Para-Punch remote EQ provides a variable 35-70Hz frequency range for bass tuning.

How much heat or noise does the PPB1 generate during all-day operation?

The PPB1 is a passive wired remote with no active electronics, so it produces no audible noise and negligible heat during continuous use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.