We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black dual monitor mount with two articulated arms on a vertical pole, desk clamp and grommet base visible

Rocelco

Rocelco DM2 Dual Monitor Mount 13-27

SKU CH-6D57-SJBR7

A dual monitor arm holds screens from 13 to 27 inches and up to 17.6 lbs each with VESA 50, 75 and 100 patterns, offering 180 degree swivel, 45 degree tilt, 360 degree rotation.

  • Supports dual 13–27" screens up to 17.6 lbs each
  • VESA 50, 75 & 100 mm patterns covered
  • Double articulated arms with 415 mm reach and 180° swivel
  • Clamp or grommet mount fits desks up to 5 cm thick
  • ±45° tilt, 360° rotation for landscape or portrait viewing

Dual mount for 13-27 inch screens

The Rocelco DM2 holds two flat-panel monitors or TVs from 13 to 27 inches, each up to 17.6 lbs. Double articulated arms provide full motion so you can set the exact viewing angle. It supports VESA patterns of 50x50mm, 75x75mm and 100x100mm. The mount ships new in black finish.

Check VESA pattern and desk thickness

Verify each screen uses a 50x50mm, 75x75mm or 100x100mm VESA pattern before ordering. Confirm the desk or surface thickness does not exceed 5cm or 2 inches for the included clamp or grommet mount. Ensure each monitor weighs 17.6 lbs or less to stay within the rated capacity.

Frees desk space with full articulation

The double arms extend up to 415mm or 16.3 inches from the pole and allow height adjustment along the pole. Tilt range is plus or minus 45 degrees, swivel reaches 180 degrees and rotation covers 360 degrees for landscape or portrait orientation. Integrated cable clips keep wires tidy while the mount clears the desk surface.

Highlights

  • Supports dual 13–27" screens up to 17.6 lbs each
  • VESA 50, 75 & 100 mm patterns covered
  • Double articulated arms with 415 mm reach and 180° swivel
  • Clamp or grommet mount fits desks up to 5 cm thick
  • ±45° tilt, 360° rotation for landscape or portrait viewing

Specifications

No published specifications for this item yet.

Questions about this item

What comes in the box and what must I buy separately?

The package includes the dual-mount assembly with two articulated arms, a desk clamp, a grommet mount and cable-management clips. No extra hardware is required for standard VESA 75×75 or 100×100 monitors up to 17.6 lbs each.

My monitors have VESA 75×75 and 100×100 holes — which pattern should I use?

Both patterns are supported on each arm. Use the hole set that matches your monitor; the mount includes screws for 75×75 mm and 100×100 mm VESA patterns.

How far can I pull a 27-inch screen from the pole once the mount is installed?

Each arm extends up to 415 mm (16.3 in) from the pole, so a 27-inch monitor can be positioned that far forward and still tilt ±45°, swivel 180° and rotate 360°.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.